M-VAVE FM1 Firmware

← Open the editor

M-VAVE

Official Open's track screen: eight tracks, each with its engine and step row

Latest V14 Updated 384 stars on GitHub

M-VAVE's own open-source firmware, which turns the FM1 into an eight-track groovebox: each track plays a DX7, 303, 808, PSG, Pluck, or sampler engine, with 16 USER project slots and an eight-slot sample bank every project shares. It installs from M-VAVE's FM1 Workbench, which also edits projects, simulates the device, and can put V15 back. This editor recognises it and sends it no Program Change or effect controls, which would change its tracks, but sends it no patches yet: a DX7 track takes a voice or bank downloaded from this editor as a .syx file, through the Workbench.

V14 holds 128 independent DX7 voices in four groups of 32 and takes DX7 single-voice and 32-voice bank SysEx.

Going back: the Workbench's Restore original V15 replaces all four banks with the factory voices, and a force flash may erase projects and samples, so download a backup from this editor first.

Works with this editor Latest V16 Updated Not on GitHub

The firmware every FM1 ships with: a six-operator FM engine compatible with DX7 voices, four banks of 32 presets, effects, an arpeggiator, and a sequencer. Install it with M-VAVE's M-UPGRADE tool, which is also the way back from Felucca and SLOOP. V16, released on 21 October, makes the FM1 eight-part multitimbral, with 20 voices shared between the parts, longer patterns, and one library of 128 effect settings that every preset shares; this editor has not been tested with it yet.

Going back: download the stock firmware from M-VAVE's downloads, under PC Firmware, and install it over whichever firmware the FM1 runs; many custom firmwares' own installers can put it back too. If SLOOP, or a firmware built on it such as sloopDX or zp12, no longer starts, hold OCT− alone while switching the FM1 on: it starts in USB rescue, ready to install again.

M-VAVE also publishes a groovebox firmware of its own, Official Open, listed above.

Works with this editor Latest FM-1_102 Updated Not on GitHub

Keeps M-VAVE's FM engine and effects, fixes its engine bugs, and adds a Virtual Analog engine, an 8-Bit engine, a Bitcrush effect, a 64-step sequencer, and a Note Engine for arpeggios, auto-arpeggios, and auto-chords. It installs from Baud Girl's own browser page, keeps your presets, and can put M-VAVE's firmware back. This editor reads and writes its FM, Virtual Analog, and 8-Bit presets, effects included, keeps the 8-Bit ones in the library, and downloads them as presets files.

seajaysec

Latest 2.0 Updated 8 stars on GitHub

A karaoke robot with a band, an homage to the performer Alexei Shulgin's 386 DX. It sings songs you bring in from karaoke and MIDI files, and lines you type on the FM1, to the notes you play, with a face whose mouth opens with the sound. Keys, bass, and drums play along with a step sequencer and sixteen punch-in effects. It installs from its own browser page, which also runs it there.

romainguy

Latest 0.4.0 Updated 4 stars on GitHub

A sixteen-voice physical modelling and virtual analogue synth built around key-tracked bucket-brigade resonators, with morphing oscillators, six multitimbral voice groups each with its own arpeggiator, and a four-stage effects bus. It installs from its own browser page, which also plays it in an emulator and can put M-VAVE’s firmware back.

InigoHernandez

Beta · Latest 0.3Updated 2 stars on GitHub

A PS1-era jungle break chopper by MONO2K’s maker: royalty-free Amens sliced across the white keys, performance effects held on the black keys, and the sound of a 1990s console’s sound chip, with its reverbs, sample grit, and CD audio. Its README calls 0.3 a beta, tested on an FM1. It installs from its own browser page, which also plays it, or its release package.

kevinelliott

Latest 0.7 Updated 5 stars on GitHub

Turns the FM1 into a desk controller for coding agents running on a computer, with their states on the key lights and the screen, driven by a program on the computer. Its README says 0.3 runs on its author’s FM1, and 0.6 adds light cues, context gauges, and more sounds. It installs from its release package, plays a scripted session in a browser emulator, and no licence is stated.

stephencummins

Latest 1.5 Updated 4 stars on GitHub

A generative Irish ambient firmware, a fork of NACHTFAHRT: harps in a jig's threes and a flute over a held drone, in the old modes, with surf, wind, and rain behind. Eight pieces play themselves for ever, and the white keys play a flute that answers you. It installs from its own browser page, which also plays it in an emulator.

joshbartlettband-web

Latest 0.1.76Updated 1 star on GitHub

A series of firmwares, one per record, by Rainbow mode's maker: a few deep sounds drawn from photographs, each moving its photo as it plays. Album 01 bends chords the whole time they ring, through a reverse reverb, with a chord on every key, a soft beat for every patch, and two FM1s playing together over MIDI clock. It installs from its own browser page, and plays in a browser first.

MarcoCasanova00

Latest 0.4Updated 0 stars on GitHub

A hard-tekno generative groovebox built on Bunker Evolved 1.0: pick a genre and a seed, and it writes a 64-step song across four tracks, pad, lead, bass, and drums, the same every time for the same settings. Its README says its song editor’s backup round trip was checked on an FM1. It has no numbered releases: it installs from its own browser page, which writes only over M-VAVE’s V15 or AMARU itself, and has a song editor and a browser emulator.

Charles Vestal

AMB-1's Garden screen, with a chord ring labelled Dm7 and four knob readouts

Latest 1.3.2 Updated 139 stars on GitHub

A generative ambient machine inspired by Brian Eno's Music for Airports. It plays itself from the moment it is switched on: breathing voices, soft bells on tape loops of unequal length, a gliding bass, and quiet Euclidean percussion. It installs from its own browser page, which can also put M-VAVE's firmware back, and plays in a browser first.

kidbee85-beep

Latest E1 Updated 3 stars on GitHub

A generative ambient firmware that keeps AMB-1’s controls, with 64 sounds and 32 themes. Its README, in German, says its maker tried release E1 on their FM1 on 17 October. It installs from its own browser page.

mentalcells

Latest 0.1.0 Updated 1 star on GitHub

An ambient instrument built on Felucca: four tracks of curated sounds, held chords, scattered notes, and four knobs for Shape, Motion, Density, and Space. It installs from its own web page, with a browser version to try first.

ejtb76

Latest 2.1.1Updated 25 stars on GitHub

A live jungle firmware, by Presethead, built on fm1-base. Version 2 adds more breaks, your own breaks and a steadier MIDI clock. It plays the Amen break sliced into sixteen 8ths, with rolls, builds, echoes and an old-sampler stretch on the white keys, single hits on the black keys, a pattern that varies itself and a fill at the end of every phrase, and knobs for a ringing delay, variation, warp and a DJ filter. It installs from its own browser page, and the update loader is included so you can go back to V15.

drophlex

Latest 1.8.2-an2-r5 Updated 1 star on GitHub

An ambient instrument by Polaris Sound Lab, the makers of Dark Funk Durcal Synt, that keeps playing by itself: choose a mood, and on its AUTO page the music keeps growing. The same instrument runs in a browser, as a Mac app, and as an Ableton plug-in, and the FM1's screen reads in English or Spanish. It installs from its own browser page.

beashoko

Beta · Latest 1.1 Updated 11 stars on GitHub

A Felucca fork for sampling, kept deliberately simple: 32 sample slots of three seconds each, an eight-track sequencer, a sample and loop editor, and recording through a computer's or iPhone's microphone, bridged by its own page. It installs from that page. Its repository holds the page, not the firmware's source.

CodingSlapfu

Latest 0.7.14Updated 0 stars on GitHub

A generative ambient firmware of Solfeggio tones, binaural beats, and soundscapes, with eight musical roles including drums, an eight-track console, and its own AQUORA Sans font. Its 0.7.14 release notes link the firmware package and say testing on a physical FM1 is still pending. Its README says the owner verified 0.2.0 playback on an FM1.

Wulgaren

Araminta's boot screen, a white flower drawn in dots on black

Latest 4.8 Updated 15 stars on GitHub

A fork of Felucca 1.5.1 that adds JIANT's DRUM-X drum kit and punch-ins, free-take recording from Sloop, a mixer solo, an effects list you chain or send, and, since 3.0, a WAVETABLE engine. It installs from its own browser page, which can also put M-VAVE's firmware back.

PolarPatch

Latest 2.1.4 Updated 8 stars on GitHub

A dark ambient drone firmware built on GR!MM, whose new HOWL sound source is a feedback loop that wakes past a threshold and screams. It has 46 factory sounds, six screaming presets, and a browser demo and editor. Version 2.0 adds JIEHKKI, which plays a whole drone piece by itself for 5 to 60 minutes or endlessly, a layer of cracking and dripping ice, pure tunings for drones, and a wind noise source.

zeptosecond-dsp

Latest 1.7Updated 9 stars on GitHub

A self-playing wavetable instrument for evolving soundscapes: four PPG-style wavetable oscillators with no sequencer and no filter, moved by Serge-style function generators, sample-and-holds, a quadrature LFO and gate generators, on a Fairlight-style green phosphor screen. Its README says it was written by Claude with human guidance and tested on one FM-1. It installs from its release package.

echoe

Argo's feature poster, listing its engines and effects

Latest 1.8.5 Updated 6 stars on GitHub

A fork of Felucca, formerly called Felucca 8 Patterns, that gives each track eight sequences to swap between and chain one after another, and removes the sampling engines. Its latest release swaps in engines from Mini-Tone and JIANT and adds a preset change on each step. Its repository says a free LLM wrote it. It installs from its own browser page, which also has a web editor.

wav0902

Latest 1.0.5 Updated 1 star on GitHub

A minimal firmware with no menus and no sound presets, played with the knobs: six voices to play alone or chained together, an arpeggiator, a WAV drone, a sequencer, KIT drums, X02 ghost and alien noises, and A09 ghost radio. It is built on Dinghy, installs from its release package or the FM-1 Firmware Hub, and plays in a browser first.

ttreu

Beta · Latest 0.4.0-beta Updated 0 stars on GitHub

A modal arpeggiator firmware that plays riffs over slowly moving modal chords, with a bass note and up to two chord tones. It is built on M-VAVE's FM1 Open. It installs from its own browser page or the release package. Its README says it was tested on one FM-1 unit; no licence is stated.

KHAVld

Latest 2.0.4 Updated 5 stars on GitHub

An eight-voice drone and polyphonic synthesiser. Its README says it has had only limited testing on physical FM1 hardware, and that 2.0.2 removed repeated high-contrast flashing from 2.0.1's DISORDER mode. It comes with an install page and manuals in English and Russian.

MichaelAPerry

Latest 0.1 Updated 0 stars on GitHub

Works out the positions of the Sun, Moon, and planets on the FM1 itself and turns a birth chart into an FM patch: ten operators, one for each body, wired by the aspects between them, so the sound moves as the sky does. The screen also reads the day's transits. Its README says it installs and works on a physical FM1 and is still an early build. Its site installs it and runs the firmware in a browser emulator.

animatek

Latest 1.4Updated 4 stars on GitHub

Animatek's firmware for the FM1, named for the TB-303, kept in a repository that also holds notes on the platform, written in Spanish. It installs from the atek303-1.1.fwsc package in its release.

jasonbot

Beta · Latest 0.8 Updated 0 stars on GitHub

A USB audio interface and autotuner on FM1_AudioBase: play computer audio into it and hold a key to tune it, with a three-second sampler, tempo, an arpeggiator mask, and latch. Its README says it has been installed and updated on a real FM1, and calls the autotuner a work in progress. It installs from its release package.

SikkenWorks

Beta · Latest 5.6 Updated 5 stars on GitHub

A drawbar organ, by BEETLE's maker. Its README says B1 has been installed and tested on a real FM1, including booting and sound output, and its release package comes with a browser installer.

R-Jeb

Latest 0.6 Updated 4 stars on GitHub

A B3 tonewheel organ worked out from setBfree's own data: 91 tonewheels, nine drawbars, key click, vibrato and chorus, percussion, overdrive, reverb, and a Leslie, with all 110 of setBfree's programs. Its README says 0.2 has been tested on an FM1 by one person. It installs from its release package and plays in a browser, and since 0.5 has a web editor that reads and writes the FM1.

arrastao

Latest 0.8 Updated 2 stars on GitHub

Brazilian rhythm kits by Mulú: Tamborzão, Voltmix, and Beat Bolha, with 12 samples built in and a 16-step bar for each preset. Its README calls 0.7 stable after a user reported it working on their FM1. It installs from its release package.

imijes

Latest 0.9.4 Updated 2 stars on GitHub

A monosynth firmware in the style of the Bass Station 2, with 32 factory patches of its own and Bass Station II patch dumps in and out over SysEx. It also works from an iPhone or iPad in RemoteFM1, and from 0.8.1 plays through Bluetooth headphones and speakers. It installs from its own browser page, which also plays it in an emulator, and has a manual.

UnkleBlairy

Beta · Latest 0.6.1 Updated 12 stars on GitHub

A live-jamming groovebox in the style of the Digitone and Model:Cycles, modified from Felucca. It has six tracks with 16-step sequencers, parameter locks, a four-operator FM engine, 808-style drums, and a sampler for your own sounds, and installs from its own browser page.

SikkenWorks

Latest 1.8.3 Updated 7 stars on GitHub

A six-lane tracker and drum machine: five synth lanes and a drum lane, 48 patterns, songs, and live effects, played from the FM1's own controls, with six channels of USB audio out. It installs from its own browser page, beside a simulator and a project manager.

SikkenWorks

Latest 1.3.1Updated 2 stars on GitHub

The drum-focused fork of BEETLE: a six-lane drum tracker with two built-in ROM drum engines, 48 patterns of 1 to 16 steps per lane, a song mode of up to 64 positions, and a live mode with a 24-position setlist. Its README says the developer tested it on two FM1s. It installs from its own browser page.

DPangerl

Beta · Latest 0.2 Updated 0 stars on GitHub

Makes the FM1 a USB sidecar for the teenage engineering OP-1 Field: the OP-1 streams its four tape tracks to the FM1, and the FM1 sends a chosen pair back as the OP-1’s USB input to record. Its README says this was tested with an OP-1 Field on firmware 1.7.3, and lists what is built but not yet tested. It installs from the FM-1 Firmware Hub or its release package.

jiripisa

Latest 0.5.1 Updated 5 stars on GitHub

A generative sequencer in the Berlin School tradition, for the FM1 to run on its own. A small ensemble of voices repeat and phase against each other on loops of unequal length, each going out on its own MIDI channel over USB, as the FM1 makes no sound of its own. It plays what Berlinan for macOS plays and installs from its own browser page.

TexasRADIO

Latest 2.3.1 Updated 0 stars on GitHub

Big Beat Studio BB1 2.0, built on Felucca: two independent drum layers and Dillo acid bass, sharing tape echo and spring reverb. A synthesised 808 and seven sampled machines, 539 rhythm sections including 138 Roland rhythms, and 205 acid bass phrases. Version 2.0 adds a song arranger, ratchets, reversible Evolve, swung recording, a kit builder and 31 additional drum kits. Use its own installer for the application and matched sound library. Release notes document the known audio timing limitation.

Big Beat Studio

BB-BOB's launch poster: a cowboy in a yellow suit on a gold disc above the words Big Beat, with the line Bob Wills in your pocket

50-song edition Updated Not on GitHub

A Western swing bandstand in your FM1. Call one of 50 classics or hit New Tune and see what the band comes up with, give Leon the steel break, throw in a fill, and bring them back to the theme. Turn Then/Now and the rhythm section picks up acid bass and electronic drums. BB-BOB is standalone FM1 firmware. The product page has the current install instructions.

nzimas

Build 107 Updated 12 stars on GitHub

A firmware for rhythmic noise, power noise, industrial, and IDM, after the Elektron Digitone II. It installs from its own browser page, and its manual is on the same site.

gfcalvi

Latest 1.3.4 Updated 0 stars on GitHub

An eight-track firmware with its site and manual in Italian. Its 1.3.4 gives the Knit tracks two oscillators with their own filters and envelopes and a chorus on each Knit and Jacquard track, with five project slots. It has no GitHub release; it installs from its own browser page, which also has tools for backups, loading and saving songs, converting projects, and exporting audio, with an emulator and a PDF manual. Its README says the new functions of 1.3.4 have no documented hardware test yet.

provostprovost

Latest 2.2.1 Updated 3 stars on GitHub

A 12-bar and 8-bar blues backing band with 14 grooves, 14 bass engines, 18 keyboard tones, and 12 drum kits, separate fullness and variation controls, live cues, 16 preset slots on the white keys, and a four-voice lead synth whose lights show the chord root and the blues scale. Its README says it was built and tested on the original FM1. It installs from its own browser page, with builds for the SMK-37 keyboards too.

charlesvestal

Latest 0.9.2 Updated 2 stars on GitHub

A seaside arcade of music games for the FM1: cabinets such as Striker, Moles, Tiles, Gull and Teacups pay out tickets that trade for prizes. It installs from its own browser page or from its release package, and can be tried in a browser emulator first. The README does not say whether it has been tried on an FM1.

IanP06

Release candidate · Latest 1.0.0-rc10Updated 0 stars on GitHub

An experimental six-track instrument with eight sound engines, free loops, and clock. It is a fork, and its README says RC7 was tested on the owner's FM1 and is confirmed working, with a hardware test record in the repository. It installs from its release package and plays in a browser first.

ImpossibleKnot

Release candidate · Latest 0.4.0-rc1Updated 1 star on GitHub

A playable little band built on Felucca 1.6.1: a cat plays the keys while three more react to the music, with thirteen sound engines, a generated backing band, and a looper for your own melodies. Its README says the upgrade from 0.3.0 to this release candidate was tested on one FM1. It installs through Felucca's updater from its release package.

Josh-McFarlin

Latest 1.9.6 Updated 2 stars on GitHub

A renamed fork of SLOOP that carries on from SLOOP 2.8.3 with an eight-track project format of its own. Since 14 Nov its site, installer, and web editor are on Replit. It installs from its own browser page, which also updates an FM1 running SLOOP or Felucca, and has a web editor.

devrvega

Latest 0.1.0 Updated 3 stars on GitHub

A music toy for children that is also a real synthesizer: every control is a friend whose body is the sound, and the same toy grows from pressing things at three, to beats and loops, to a subtractive synth with its real names. It installs from its own browser page, with an emulator to try first and printable guides.

NorfolkHacker

No numbered releasesUpdated 2 stars on GitHub

An IDM and braindance firmware, a fork of JIANT FM, formerly called ACID FM. Its 0.9.1, the version its README names, trims JIANT's engines for IDM, gives its sound, sequencer, global and MIDI screens an acid look of its own, and has a generator that writes whole songs on the device across its genres; breakbeats loaded from its web page are planned. It installs from its own browser page, which also plays it in an emulator, and has a manual.

hiroikezawa

Experimental · Latest 0.1.5 Updated 2 stars on GitHub

An FM synth for industrial techno, noise, and dark ambient, built on Felucca: four operators in a 4×4 modulation matrix, METAL, GROWL, CHAOS, and NOISE modes, a wavefolder, a morph between two sounds, and a COMPLEX ARP that generates a pattern from the keys held and keeps it as a loop. Its README, in Japanese, says it runs on an FM1. It installs from its release package.

Erbubar23

Bubba Machine's home screen, listing machines BR-8, BP-1, and BB-303 with their step patterns

Beta · Latest 0.10.0 Updated 10 stars on GitHub

A six-track live groovebox written from scratch. Since 0.10 its HOME is a six-channel mixer, and entering a channel hands the FM1 to its machine, laid out like the real one: a TB-303, a Minimoog, a Juno-6, Vital, and the FM1's own DX7-style synth, with drums on a step sequencer of their own and the BP-1 Slicer for your recordings. It installs from a browser page and has been tested on one FM1. Until 1.0 an update can erase what you saved: 0.10 clears saved patterns and scenes once on its first start, keeping takes and settings. Its documentation is in Spanish and English.

perawoga2-coder

Beta · Latest 1.8.2-bs12 Updated 0 stars on GitHub

A sampling-first firmware built on Felucca 1.8.2: its Firmware Hub card says a SAMPLE row on HOME opens a page to trim and slice the three user sample slots, and that one sample can span two or three of them. Its 1.8.2-bs12 release adds the Burger Studio app’s colours and UNDO TAKE, which takes recorded layers off one at a time. The release notes call it a beta and say to back up first, and its README is still Felucca’s. It installs from its release package and has a browser editor.

llozd

Latest 1.3.2Updated 6 stars on GitHub

A bytebeat synth built on Dinghy: the note you play sets how fast a formula of t runs, and the knobs change the numbers inside it. It has 30 built-in patches, 64 user slots, a live formula compiler on the device, and a random formula generator. It comes as a release package, not a page that installs it.

bonszaimusic

Latest 1.1.0 Updated 27 stars on GitHub

A multi-engine synthesiser, an independent fork of Felucca 1.6.1 continued now that Felucca's own development has ended, with SEM, HADES, and DRONE among its engines and screen colours of your own set from its web editor. Version 1.0 starts afresh: backups from before 1.0 are not imported, and the 0.13 line is no longer maintained. It installs from its own browser page or its release package, and plays in a browser emulator.

OwenKirby

Beta · Latest 0.9.6Updated 15 stars on GitHub

A wavetable synth themed on Carnac's standing stones: 15 morphing wavetable banks, seven voice architectures, among them STRIKE with 20 synthesised Neolithic attack sounds, four filter types, spring, tomb, and tank reverbs, a step sequencer, an arpeggiator, and two layers with splits. It installs from its own browser page or its release package, and plays in fm1-emu.

provostprovost

Latest 1.4.0 Updated 1 star on GitHub

A generative dungeon-synth and 16-bit RPG soundtrack on Dinghy, by Blues Box’s maker. Phrases played on the keys become a party’s attacks on a boss, woven into a four-bar arrangement with chords and drums across nine pixel-art stages, while the boss answers with counter-attacks that change the music. Its README says it was built and tested on an FM1, and it installs from its release package.

DJ Redacted

Experimental · Latest 0.1.0 Updated Not on GitHub

Four generators, circuit, machine, organism, and radio, each with 30 synthesised sounds, that play by themselves and can be played from the keys. It installs from the same browser page as REDACTED, which says it still needs testing on an FM1.

pbarilla

Latest 1.7.0 Updated 9 stars on GitHub

Chiptune music on the FM1: build songs from NES, Game Boy and Master System sound chips, then wreck them with punch-in effects. It comes with the Tetris theme preloaded and plenty of free space for your own, installs from its own browser page, and can be tried first in a browser.

profikid

CHOPPAH's slicer screen: the break cut into sixteen slices, with the playhead and the slice window

Latest 1.5.1 Updated 15 stars on GitHub

A breakbeat chopper: a break is cut into sixteen slices on the white keys, with momentary effect pads, a generator that rearranges the break and a master effects chain. Eight classic breaks are built in, and there are sixteen patterns with a step sequencer and a synthesised kick, snare and hat on the drum lanes. The README says the engine, slicer, pads, generator and effects work on the device. It installs from its own browser page or its release package, and the installer can put M-VAVE's firmware back.

Quixotic7

ChoralRoot's FM1 panel, showing a D major seventh chord on the screen

Beta · Latest 0.43 Updated 110 stars on GitHub

A chord instrument inspired by Telepathic Instruments' Orchid: one hand plays roots while the other shapes chords, with voicings, key and performance modes, a bass line, and a looper. Built on Felucca's engines and the monome grid ChoralRoot, it installs from its own browser page and can be tried first in a browser emulator.

eremansim

Pre-release · Latest 0.23-j6 Updated 0 stars on GitHub

A fork of Quixotic7's ChoralRoot FM-1 that adds 100 chord sets in the style of the Roland AIRA J-6, with a ready-made chord for each of the twelve notes. It installs from its own browser page or its release package. Its README says it was written entirely by an AI and has not been run on a real FM1, only in tests and an emulator.

DJ Redacted

Experimental · Latest 0.2 Updated Not on GitHub

Plays 36 traditional carols in full instrumental arrangements, about an hour of them, with five melody voices to choose from and an organ to play along on the keys. It installs from the same browser page as REDACTED, which says it still needs testing on an FM1.

tokumine

Latest 1.0.1 Updated 0 stars on GitHub

A concert grand piano modelled from its strings, soundboard, and dampers, with a Tap Pianist mode in which any key plays the next notes of one of 87 classical pieces at your touch, a one-finger chord keyboard, and a four-slot song recorder. It supports both FM1 flash chips and installs from its release package.

clickysteve

Latest 1.0.0 Updated 3 stars on GitHub

CLATTER's LXR-02 drum synthesis as a generative drum machine: seven voices, a 64-step sequencer with conditions and per-step pitch, patterns generated and mutated in 11 styles, and nine named projects. Its README says 1.0.0 was hardware verified on one FM1, installed from stock V15 and over earlier firmware, and that Bluetooth, DIN MIDI, and SAFE MODE are untested. It installs from a browser installer, with a demo to try first.

mammothcheese

Latest 1.3 Updated 1 star on GitHub

A recreation of the 1947 Clavioline, an early electronic analogue synthesiser, rebuilt on Dinghy from the original circuit diagrams, with its tone-shaping stops, vibrato, and knee-lever expression. It installs from its release package or through the FM-1 Firmware Hub, and plays in fm1-emu in a browser.

isod89

Experimental · Latest 1.3.1 Updated 90 stars on GitHub

A synthesizer from SLOOP, and so from Felucca, with 23 engines and 407 sounds in one instrument and no tracks, drum machine, or song mode. Among them are a three-oscillator voice, a six-operator FM engine that also plays the DX7 voices of a bank, and wavetables. Its notes call it experimental and say it has run very little on an FM1. It installs from its own browser page, with a web editor.

Big Beat Studio

Compás on the FM1's screen: a cumbia arrangement at 100 BPM, its band, bass, and percussion levels, and six song parts

Latest 1.2 Updated 0 stars on GitHub

A rhythm section for cumbia, salsa, merengue and bolero: cue the next section and the band lands on it together. Version 1.1 adds a fifth page, KUMBIA, with sounds and patterns from the Hanan Cumbia drum machine, to the 29 groove studies of 1.0, 28 arrangements of written songs, a TR-727 percussion mode, and screens in English or Spanish, which its installer lets you choose. The browser player needs nothing.

DJ Redacted

Experimental · Latest 0.5.1 Updated Not on GitHub

Four found-sound processes that move across the stereo field, with a dark drone on the keys, a shimmer reverb, and a filtered static wind. It installs from the same browser page as REDACTED, which keeps its earlier versions for going back.

MammothCheese

Latest 1.0 Updated 1 star on GitHub

A pocket symphony orchestra groovebox built on Dinghy, by Clavioline’s maker, with strings, woodwinds, brass, and percussion: compose in a piano roll or in notation, conduct each section with articulations, dynamics, and expression curves, and arrange patterns into whole pieces. It installs from its release package or the FM-1 Firmware Hub, and plays in fm1-emu in a browser.

saulofilho

Latest 1.1.1Updated 0 stars on GitHub

A Latin and Caribbean groovebox: congas, bongos, timbales, güiro, clave and cowbell synthesised on the FM1, played by hand or by the sequencer, with a HUMAN knob that loosens the hand. Its README says 1.0 was tested on a real FM1, installed from the official V15 and from another firmware. It installs from its release package and has a browser emulator.

FicusFicusov

Latest 0.7.1Updated 27 stars on GitHub

A chord instrument inspired by Telepathic Instruments' Orchid: press a chord key and each note you play becomes a whole chord, with a bass underneath, while a pixel flower grows from your chords. It installs from its own browser page, which saves your sounds first when the FM1 runs CoralFlower, ChoralRoot, or Felucca, and a browser version plays it first.

chasedeanda

Latest 1.0.3 Updated 3 stars on GitHub

A chord instrument, groovebox, and songwriting companion: choose a progression and a sound, press PLAY, then add drums, shape the bass, turn a chord into an arpeggio, or take over with your own playing, with a live chord display on the home screen. It installs from its own browser page, and plays in a browser first.

guiatihe333

Latest 1.5.21 Updated 1 star on GitHub

A generative FM instrument forked from AMB-1: three six-operator FM voices with DX7 banks play chords that grow by themselves, a tape reel records and replays them, songs come in from MIDI files, and a video synth on the screen moves with the music, while a cartoon cat explains each page. It installs from the .fwsc package on its release page and plays in a browser simulator first.

C0DED00D

Latest 4 Updated 0 stars on GitHub

A cowbell machine after Bad Gear's Volca Cowbell joke, built on M-VAVE's open SDK: a giant MORE knob for ratchets, FEVER for pitch, and PRESCRIPTION choosing one of 13 cowbells sampled from a TR-8S and a DM-10. It installs from its release package with a command-line installer, and a browser page sends the full-quality samples.

TerkWerX

Latest 0.26.19 Updated 3 stars on GitHub

A synth and four-track groovebox, called TERKINSTEIN until 0.26. It plays, edits, sequences, and saves on the FM1 itself, with piano-roll editing, saved song swing, and a virtual FM1 to try in a browser. It installs from its release package.

devrvega

Latest 0.1.2 Updated 0 stars on GitHub

A four-track groovebox that plays the sound chips of nine game consoles and home computers, with drums on the first track and sixteen sounds per console on the others. The screen is themed to the chosen console. It installs from its own browser page, and a browser emulator lets you try it without an FM1.

twochannels

Latest 0.3.2 Updated 12 stars on GitHub

A Yamaha CS-80 in the FM1: two channels a voice, the CS-80's own preset tones, a ribbon on the SELECT knob, and a plate reverb that goes on for ever. It is built to be played from a sequencer through the TRS jack, installs from its own browser page, and can be tried first in a browser emulator.

beatcult

Latest 1.2 Updated 3 stars on GitHub

A three-channel machine for drums, a Polivoks-style synth and a dub siren, each with its own sequencer and effects: ten Elka Drummer One samples with a 16 to 64 step sequencer, a duophonic voice with an arpeggiator and a recordable note sequencer, and a siren after dubmarine. Two BBD-style echoes and a per-channel pan finish the mix. It runs on the FM1 by itself, plays in a browser, and its package accepts both flash chips found in FM1 units. A fork of Dinghy.

Charles Vestal

CTL-1's play screen, with a keyboard, USB and TRS switches, and four controller knobs

Latest 1.0.3 Updated 29 stars on GitHub

Turns the FM1 into a MIDI controller: the keys play in a scale with its chords under the black keys, four banks of knobs send controllers, and an arpeggiator and a four-track Euclidean drum sequencer run on its clock. It plays General MIDI sounds of its own too, installs from its own browser page, and can be tried first in a browser emulator.

cursedsound-music

Latest 0.20.0 Updated 2 stars on GitHub

A six-track groovebox on JIANT FM's engines and sequencer, with an Elektron-style interface: one-press loops in five styles, generators for 303 lines, dub chords, and Euclidean rhythms, parameter locks and trig conditions, and the FM1 following an Elektron Syntakt's clock and patterns. Its README calls it early: it runs on its author's FM1 and has not been tried on many units. It installs from its release package.

kidbee85-beep

Latest 1.2.1 Updated 4 stars on GitHub

Kid Bunka's beat machine: 64 drum one-shots and 12 break arrangements, three expansion banks of recorded hits, and eight punches you can record. It installs from its own browser page, which also covers recovery, and a browser editor plays it first.

TEG-Lizard-Man

Latest 1.1.3 Updated 3 stars on GitHub

A playable Chladni plate: keys strike, bow or rain on a virtual metal plate, and the sand on the screen settles into the figure you hear, using modal synthesis. It installs from its release package (cyma-1-v1.1.3.fwsc). The README says it has run on a real FM1 since 2026-10-29.

wissamsader

Beta · Latest 0.18 Updated 1 star on GitHub

An Arabic wedding keyboard by STUDIOMORPHIK: maqam scales with quarter tones on any note, dabke and shaabi rhythms, mijwiz, zurna, oud, and qanun voices, a drone, and eight tracks with loops and steps, where leaning on a key bends the note. Its README calls it a public beta, tested on one FM1 with the newer flash chip. It installs from its own browser page, and has a manual and a browser emulator.

drophlex

Latest 1.8.2-dfd10 Updated 0 stars on GitHub

A groovebox for acid, breaks, jungle, and warped funk that is always in key: blend two of 15 styles and SUMMON plays drums, acid, bass, and melody at once, with eight live pads for mutes, fills, builds, and drops. The same instrument plays in a browser and as a free plugin, and the FM1's screen reads in English or Spanish. It installs from its own browser page.

sparky480v

Latest 1.0.7 Updated 2 stars on GitHub

A dark-music firmware modified from PERF-1, with 16 dark genres, 160 factory pieces and a Wander mode that evolves the music by itself. It installs from its release package with an FM-1 installer page, and can be played in a browser first. The README says it was installed and tried on one real FM-1 by its author.

delirioux

Latest 1.0.2 Updated 3 stars on GitHub

A firmware that plays a groove when you press PLAY: a filtered loop, a mix that ducks on each kick, a robot voice and drums, in ten styles steered with four knobs. It is built on Tuna and Felucca. It installs from its own browser page over USB, and can be tried in a browser first. It runs on the FM-1, with no warranty.

halfman73

Latest 0.1.1 Updated 0 stars on GitHub

Felucca 1.8.2 with hazy, slightly detuned synths, dusty synthesised drums, and a tape stage over the whole mix, with no samples of its own: it adds a DRIFT engine, AGE for tape wear and hiss, and a DUST drum kit. Its README says it has run on a real FM1. It installs from its release package.

WisestWizard

Latest 1.11Updated 0 stars on GitHub

An ambient drone machine on fm1-base: every key swells in a voice that stays, eight of them drawn as beams on the screen, and GEN moves them through a chord progression or a Euclidean arpeggio by themselves. It has thirteen models, a noise layer, a hall reverb with freeze and shimmer, a delay, and 32 presets. Its notes say an update was confirmed on hardware. It installs from its own browser page, which also plays it in an emulator.

jsopdebeeck

Latest 1.0.1Updated 3 stars on GitHub

A rhythm box of hand percussion for accompanying songs in a circle: djembe, cajon, udu, clapsticks, maracas, and triangle, with their strokes on the black keys and a step sequencer on the white, and a berimbau and tanpura and shruti box drones played on their own. Built on fm1-base, it installs from its release package.

InigoHernandez

Latest 0.4.25Updated 5 stars on GitHub

An ambient lo-fi machine, by MONO2K's maker, built on 64 recordings made with pedals and played by three synths, each with its own piano roll, patterns, and chain of lo-fi effects, with scenes, a song, and a chord machine leading them. It installs from its own browser page or its release package, and plays in a browser first.

sinscum

No numbered releases Updated 2 stars on GitHub

Darksynth, noise, and drone firmware built on Felucca 1.6.1: four tracks, fifteen engines among them its own DRONE and BASS, a 64-step sequencer per track with chords, ratchets, conditions, and parameter locks, an arpeggiator, a song chain, and MIDI clock in, under long, worn effects. It installs from its own browser page, plays the real firmware in a browser, and has a web editor for sounds, samples, and backups.

drophlex

Latest 1.8.2-da1-r7 Updated 0 stars on GitHub

Acid and dirty electro on one squelching voice, playing 16-step riffs from its web generator, with 16 styles, 19 sounds, and a DIRTY page of distortion and pumping. It shares its patterns with its browser and plug-in versions, its README marks the FM1 edition as tested on hardware, and it installs from its own browser page.

zvenson

Latest 0.5 Updated 54 stars on GitHub

The smallest firmware to build your own on, by sloopDX's author. It plays a sine wave on the keys and nothing more; under it, the update path, USB rescue, USB MIDI and audio, the panel, the screen, and settings all work and are documented. It installs from the FM-1 Firmware Hub.

seanohollaren

Experimental Updated 2 stars on GitHub

Doom as the FM1's firmware, separate from FM-1 Doom. It has been installed and played on one FM1, replaces the synth firmware, and installs from its own browser page, which fetches the shareware game data into your browser.

joshbartlettband-web

Double Rainbow's Vesper, a moth in a velvet cape, under a rainbow, with four knobs: GLOW, BITE, BLOOM and DRIFT

No numbered releases Updated 2 stars on GitHub

Rainbow mode's older sibling, for ages ten and up, built on Melodee: 30 characters escaped from the Keeper's jars, each a real synth engine, from a Prophet-5 and FM to a TB-303 and an 808. Each has four knobs, a beat, an arp, and codex pages on its engine, with chord modes, an ear trainer, and 14 songs to learn one key at a time. Holding HOME and SAVE opens the full Melodee synth. It installs from its own browser page, and plays in a browser first.

DP3OYB

Latest 1.0.8 Updated 0 stars on GitHub

A six-track performance groovebox grown from Felucca, adding two LFOs with sequencer trigs, retriggering envelopes, a mixer and a track sequencing view with quick-access controls, and note hold across tracks. It installs from its release package and plays in a browser.

kevinsint

DR1

Early work · Latest 0.30 Updated 0 stars on GitHub

A drone instrument: three voices with styles and free frequencies, links between the voices, a mixer, and effects. Its README calls it early work, tested on one FM1, and it installs from its release package with a Python tool on a Mac or Linux.

FBNFRTG

Latest 0.9.6Updated 5 stars on GitHub

An ambient instrument based on Felucca: classic synth sounds, basses, pads, and plucks on two oscillators with three sample slots, under a repeating generative Euclidean sequencer, in a minimal monochrome interface. Its README says earlier builds were tested by users and that 0.9.6 itself still needs a test on a real FM1. It installs from its own browser page or its release package, and plays in a browser first.

fc79

Latest 0.9.6 Updated 2 stars on GitHub

A drum machine of ten synthesised drum channels, with no samples: 32 patterns of up to 64 steps with parameter locks, conditions, micro timing and ratchets, free recording, beat repeat, eight LFOs a pattern, and a reverb, tape delay, and compressor. It installs from its own browser page or its release package.

sbegueria

Latest 1.4.3 Updated 45 stars on GitHub

A generative dub techno machine, a fork of AMB-1. It plays itself from the moment it is switched on: chord stabs through a resonant low-pass into a tape echo, FM pings on loops of unequal length, a sub bass, a four-on-the-floor kick, and vinyl crackle. You steer it rather than play it. It installs from its own browser page, which can also put M-VAVE's firmware back, and plays in a browser first.

ChanceTheMaker

Experimental · Release 26 Updated 3 stars on GitHub

A Doom-engine port for the FM-1 and the SMK-37 Pro and Elite, with the nine original maps and three weapons. Its page builds the right firmware for your model and installs it over USB from a browser, and can play it there first. It replaces the synth application, and its page says to back up your projects first. Release 26 for the FM-1 moves the controls to the GameDude layout; the SMK-37 build stays on release 24.

altessproduction

Latest 1.0.9 Updated 2 stars on GitHub

FM-1 Audio Router, the FM1's USB sound card and Bluetooth receiver, with SLOOP Dub's dub modules on top: a DJ filter, a siren, a tape echo, and an isolator, each on its own page, over whatever you feed it from a computer, a phone, or a mixer. It has no sequencer and no synths. It installs from its own browser page and plays in a browser emulator first.

marwanfarha

No numbered releases Updated 1 star on GitHub

Two tracks of dub chords, a bass, and an FM ping, for dub techno, minimal, and microhouse, with one-finger chords in root position or either inversion. It has no GitHub release; it installs from its own browser page, which can also put the stock firmware back, and plays in a browser.

OSCILL/R

The DUELL card: a multimorphing bitimbral synthesiser by OSCILL/R

Latest 1.3.6 Updated 22 stars on GitHub

A multimorphing bitimbral synth built on Felucca: two complete parts, three ways to play them together, and a morph that glides between two versions of every sound. Ten engines with wavetables, twin filters, effects, and a mod matrix, with macros, velocity, aftertouch, and MIDI presets for Circuit Tracks and MPC or Force. It has run on its author’s two FM-1 units. It installs from its own browser page, has a web editor and a cheat sheet, and plays in a browser emulator first.

BourbonWX

Latest 1.5 Updated 1 star on GitHub

A tracker-style four-track FM groovebox forked from Felucca 1.6.1, with a first-person dungeon crawl on its home screen that the song plays. It adds FM drum and tone engines, wavetable and SID-style voices, and new drum kits. It installs from its release package (.fwsc).

pjac1810

Latest 0.1 Updated 0 stars on GitHub

A two-stylus drone synth after the Dubreq Stylophone CPM DS-2, by SPELLBOX's maker, on foma. All its sounds are synthesised. It installs from its own browser page, which also offers a USB rescue and the way back to M-VAVE's firmware.

Esben von Buchwald

DX747's start screen: a jumbo jet above the name, with the words 8-part multitimbral DX7 module

Beta · Latest 0.1 Updated 4 stars on GitHub

An eight-part multitimbral DX7 module. Every part has its own MIDI channel and up to eight layered DX7 voices, with key splits, velocity windows, 64 scenes, a master filter, and shared reverb and delay, and it imports DX7 ROMs. It has no sequencer, sampler, or projects. It is a fork of Official Open, so it brings M-VAVE's update loader, and it installs from its own page over Web MIDI in Chrome or Edge. It can be tried in a browser first.

Philip-Bos

Latest 0.2.15Updated 23 stars on GitHub

A free, open-source granular sampler: a few seconds of any sound become slow clouds, sparkles, tape loops and swells, played from the FM1's keys and knobs in six modes (CLOUD, DUST, TAPE, BLOOM, PULSE and DRIFT). Its grains render across both cores, and 0.2.9 follows MIDI clock. It installs from its release package and plays in a browser emulator.

dmajka

Latest 1.4.7 Updated 19 stars on GitHub

The Erica Synths LXR-02 drum machine's sound engine and sequencer on the FM1, formerly called Kettle: six voices on seven tracks, 32 patterns with parameter locks, songs, kits, and projects, and MIDI in and out with clock sync. Version 1.0 adds new sound engines, a rebuilt effects section and recording over USB. It is unofficial, and not affiliated with Erica Synths or M-VAVE. It installs from its own browser page, which also plays it in a browser, and has a manual.

CaspiusLabs

Latest 1.0.12 Updated 2 stars on GitHub

A generative 16-bit music firmware with a YM2612 FM sound, Sega-style PSG voices, live keys, and per-instrument effects. Its release notes call 1.0.4 a stable release, retested on an FM1, and it installs from its release package.

capitanplaneta80-create

Latest 1.8.1-enjambre Updated 0 stars on GitHub

Felucca with a new engine, ENJAMB, in which insects move as agents through an orbital, quantum or atomic field, so that playing a note collapses or excites the swarm. Its pages are in Spanish. It installs from its own browser page, which also plays it in a browser, and has a web editor.

ocean

Latest 0.3.8Updated 5 stars on GitHub

A mediæval groovebox for lively tavern and court dances: plucked lutes and citoles, hurdy-gurdies, shawms, and bagpipes over drones, frame drums, and chant, in the mediæval modes. It started as a fork of GHOULBOX, itself a Felucca fork. It installs from its own browser page, with an emulator to try first, and since 0.3.0 it can tell a screen reader what its screen shows.

SikkenWorks

Experimental · Latest 1.88 Updated 10 stars on GitHub

A synth you draw, morph, and modulate. It installs from its own web page and comes as a .fwsc package. Its README calls it an experimental build and says that installing it, and returning from it to other firmware, has not been verified on real FM1 hardware.

Quixotic7

Beta · Latest 0.1.4 Updated 1 star on GitHub

A SID chip groovebox that talks, built on FIZZ by its maker: six tracks of C64 SID voices and SAM speech, per-step sound locks, conditions, ratchets, MIDI effects, and a tower of eight retro effects with a send for each track, with Bluetooth MIDI and USB audio. It installs from its own browser page, which also plays it in a browser and manages its sounds.

Gadlele

Latest 1.1 Updated 6 stars on GitHub

An ambient firmware forked from Felucca, which keeps all of its engines and adds a Pad that writes its own chords, bells that play themselves, an endless noise engine of sea, rain, or vinyl, and an Omnichord on the keys. It installs from its own browser page.

adamcharleswilsonmusic-code

Fart Machine One's screen, with a pixel-art character above reverb, delay, and repeat settings

Latest 1.1.0 Updated 25 stars on GitHub

A joke instrument that plays: eleven “artisanal farts” on the keys, a reverb, a delay, and a 16-step sequencer, with a loop you record and hear back, which switching the FM1 off clears. There is no browser installer: you download the package and its source, then install with a Python tool from a terminal.

Hügelton Instruments

Felucca 1.0's feature overview: its new design, sequencer, thirteen engines, and effects

Latest 1.8.2 Updated 760 stars on GitHub

Turns the FM1 into a multi-engine synth: thirteen engines, from analogue, six-operator FM, and phase distortion to samples, granular, drums, and physical models from Mutable Instruments' Plaits and Rings, across four tracks with a 64-step sequencer, arpeggiator, and modulation matrix. It has its own web editor and installer, and 1.8.2 supports newer FM1s with the UC25HQ80 flash chip.

Chance Roth

Beta · Latest 0.9-salt14 Updated 9 stars on GitHub

A Felucca fork with a hardware-inspired Studio in the browser, which plays without an FM1 or edits the one connected. It installs from its own browser page and leaves through M-VAVE's M-UPGRADE.

stanleygurvich

Experimental · Latest 1.6.1 Updated 5 stars on GitHub

A fork of Felucca 1.6.1 that adds MPE support, a per-voice LFO and a DRIFT source for chords that move and breathe. It installs from the .fwsc package committed in the repository. Its README says it has only been tried in the browser emulator and never installed on a real FM-1.

DPangerl

Latest 1.1 Updated 0 stars on GitHub

Turns the FM1 into a controller and USB audio interface for Steckfeld SF1, a modular synth app for iPad and iPhone: the keys play it, the knobs and buttons edit it, and the screen shows the selected module. Its README says it was tested with an iPad and Steckfeld SF1 1.4.0. It installs from the FM-1 Firmware Hub or its release package.

AveyCole

Alpha · No numbered releases Updated 1 star on GitHub

A field-recording radio powered by Radio Aporee, over the FM1's Wi-Fi: choose a country or region on a globe and listen, then capture a few seconds into a lo-fi sampler that plays on the keys, loops, and slices. Its README says the first alpha was reported working on an FM1, and that 0.1.19, which its installer page offers, still needs a test on one.

emilystgeist

Pre-release · Latest 0.4 Updated 4 stars on GitHub

A demon synth for dark, occult music, from old JRPG dungeons to dungeon synth: a GHOULBOX fork, itself built on Felucca, with ideas and code from JIANT FM. It adds five power-on scenes, a creature drawn for each engine on its edit pages, and bytebeat and floatbeat waves for the LOFI engine. Its README says it has been tested on one FM1. It installs from its own browser page and has a web editor.

jadamsowers

FiMba-1's tines screen, with the kalimba's tines, its chord buttons, and its Material, Hardness, Decay, and Tone

Beta · Latest 0.7.0 Updated 23 stars on GitHub

A kalimba grown from FoMni: the 16 white keys are tines laid out as a real kalimba's, each a physical model of a metal, bamboo, or glass bar on a body of your choosing, and the 11 black keys play thumb-roll chords, with mbira patterns, a granular cloud, delay, reverb, and tape. Its own page installs it and plays it in a browser first.

justynroberts

No numbered releases Updated 0 stars on GitHub

A six-track trance machine after Rollwerk: kick, 909 kit, bass, roller, lead, and pad play over a library of 66 chord progressions, with parameter locks and one knob, LIFT, that runs the build and the drop. It installs from its own browser flasher.

Quixotic7

FIZZ's logo, the letters in blue, green, orange, and pink among drifting coloured bubbles on black

Latest 0.13.0 Updated 4 stars on GitHub

A step-sequencer groovebox for ChoralRoot's FM TONE voice: tracks sharing a pool of sounds, a 64-step grid with microtiming, parameter locks, conditions, chance, ratchets and chords, Euclidean and grid generators, and a web sound editor and manager. Version 0.12.0, its first release out of beta, lets the FM1's USB port host a USB-MIDI keyboard or synth, with a powered hub. Its own page plays a preview in the browser and installs it over USB.

delirioux

Latest 1.1.1 Updated 2 stars on GitHub

One piece on the FM1: Chopin's Étude Op. 10 No. 1 on a sampled Steinway D, to play, shape, and practise, built on Tuna and Felucca. It installs from its own browser page and plays in a browser first.

okulik

Latest 1.2.0 Updated 1 star on GitHub

A ZX Spectrum 48K emulator that plays Spectrum games with the FM1’s keys and knobs, replacing the beeper’s sounds with FM instruments as they play. Five freely licensed games are built in, a tool packs your own, and a paused game survives a power cycle. Its README says it runs and is tested on an FM1; it installs from its release package and plays in a browser.

mystic-arcave

Latest 0.16 Updated 0 stars on GitHub

A music game played with the knobs and keys: wake up Rock, roll down to the cave, and mend a jukebox with a song of your own, then play three arcade machines. Its README says its first two releases were installed and played on an FM1. It installs from its own browser page and plays in an emulator.

maxravedj

Latest 0.6.1 Updated 5 stars on GitHub

Turns the FM1 into a two-in, two-out USB audio interface and a Bluetooth audio receiver with SBC, AAC, aptX and aptX HD, with a mixer, a five-band EQ, a peak limiter, and meters, waveforms and a spectrum on the screen. It installs with M-Flasher once the m-bootloader has been flashed, rather than from a browser page.

shan-sherif

Beta · Latest 0.9.0 Updated 9 stars on GitHub

A singing human voice, ported from Jameson Hodge’s CHIMERA and built on fm1-base: a simulated airway of lungs, vocal folds, throat, mouth, and nose sings words a syllable a key, or holds vowels shaped with the knobs, and the words are written in a browser Studio and sent over USB. It installs from its own browser page, and has a manual and a browser emulator.

copych

Latest 0.0.16 Updated 1 star on GitHub

An ear-training game on Melodee: it plays one to four hidden notes in C major or A minor, in one octave or across the keyboard, and you find them on the keys, with current and best ratings saved for each mode and FM6 or Prophet sounds. Since 0.0.16 it also has a metronome with tap tempo and rhythm games that score your timing. It installs from its own browser page, which also plays it in an emulator, and has a guide.

shan-sherif

Beta · Latest 0.9.4 Updated 1 star on GitHub

A rhythm game built on Felucca: load a MIDI file in the browser Studio, and your part’s notes fall to the keys while the FM1 plays the rest on its synth engines. You play keys, drums, guitar, or bass, with every note judged, combos, and best scores. It installs from its own browser page.

joakimeriksson

Latest 0.3 Updated 1 star on GitHub

Joakim Eriksson's SID synth for the FM1, which plays C64 tunes and GoatTracker songs and lets you write music with the GoatTracker editor. It runs on fm1-dock, and its README says it has played on an FM1.

davidamomusic

Beta · Latest 0.3.1 Updated 5 stars on GitHub

A drum synth and 16-step sequencer in the style of the DFAM: two oscillators with 16 wave types, a kick with its own sequencer, parameter locks, a sound saved with each pattern, effects, scales, presets, and projects. It installs from its release package, and its screen mirror page shows and plays the FM1's panel from a computer.

davidamomusic

Beta · Latest 0.5.1 Updated 0 stars on GitHub

A kick drum synthesiser with a sequencer of up to 32 steps, built on fm1-base: seven kinds of kick, from 808 and 909 to FM and a wave shaper, with 48 parameters, effects held on the keys, a master chain, parameter locks, a condition and a chance on every step, nine generators, and four LFOs. Its README calls it beta. It installs from its release package, and plays in a browser first.

wellingtonsaam

Latest 0.1Updated 0 stars on GitHub

A study firmware on fm1-dock: the keys light up to show where to play while a lesson page in Chrome guides notes, scales, chords, and the chord progressions of songs, section by section, with six-operator FM sounds. Its notes are in Portuguese and English. It installs from its release package, through the FM-1 Firmware Hub or a command-line installer.

little-scale

Latest 0.1.0 Updated 1 star on GitHub

The Game Gear tracker SMSGGDJ on the FM1: a Game Gear emulator boots the tracker, the FM1’s keys enter steps, and a browser page manages its cartridge, songs, and ROM. Its README says installation and playback have been confirmed on hardware. It installs from its own browser page.

luigirossi-music

Latest 1.7 Updated 0 stars on GitHub

A drum machine inspired by Sonic Charge’s Microtonic, with an engine of its own and no connection with Sonic Charge: eight synthesised drum voices, a sequencer with accents, fills, and up to 64 steps, 16 patterns a preset chained into songs, an eight-track mixer, reverb, delay, and a master compressor. It installs from its own browser page, which can also put M-VAVE’s firmware back, or from its release package, and plays in a browser first.

stevexfer

Latest 0.1Updated 2 stars on GitHub

The FM1 as a USB audio interface and nothing more: what the computer plays reaches the FM1's outputs, MASTER sets the volume, and GLO shows a visualiser, and it is meant as a small base to start new firmware from. Its README says both USB audio streams, MASTER, and the visualiser were tested on an FM1, and calls it very early development. It installs from its own browser page.

michamilz

Latest 1.0 Updated 0 stars on GitHub

Sounds for the final relaxation of a yoga class: guided programs on a held tone at 174, 396, 432 or 528 Hz with a slow pulsing rhythm, breathing noise, singing bowls and a generative ambient garden from AMB-1, with a handpan, kalimba, tongue drum, bowls or chimes to play on the keys. Its screen speaks German, English or Sanskrit, and its site is in German. It installs from its own browser page, and plays in a browser first.

morbious22

Pre-release · Latest 0.12.5 Updated 0 stars on GitHub

A fan-made Korg Poly-800 built on Felucca: its 64 factory programs and 64 slots of your own, its chorus, and its 256-note step sequencer, with a phaser, a tape echo, and MIDI clock in. Its README says it is not made or endorsed by Korg or M-VAVE. Its one release, a pre-release, carries the package.

dpwe

Experimental · Latest 0.1.0 Updated 2 stars on GitHub

AMY's emulations of the Roland Juno-60's 128 factory patches as a six-voice synth, built on X0X, shaped with the AMYboard editor's patch knobs on eleven pages, and editable live from that editor over USB. Its README says it has been built, installed and played on one FM1. It installs from the .fwsc package on its release page with the project's Python tool.

Charles Vestal

Pre-release · Latest 1.3.1Updated 13 stars on GitHub

An internet radio over WiFi: it joins a 2.4 GHz network, plays stations from Radio Garden's map, and puts punch-in effects on the keys. Its first release, 1.0, was withdrawn after crashing on some FM1s when WiFi started; 1.3.1 is a pre-release, whose notes ask anyone whose FM1 crashes to report it. It installs from its own browser page, with a manual on the same site.

ograndebe

Latest 0.2.2 Updated 1 star on GitHub

A tonewheel organ after setBfree, with drawbars, percussion, a Leslie with slow, fast and stop rotor, drive and reverb, on fm1-base and felucca-bsp. Its README says the FM1 build has been flashed and tested on a real FM1 (8 Nov), and that its SMK-37 Pro build passes its host tests but has not been flashed yet. It installs from its own page, which carries both builds.

copych

Experimental · No numbered releases Updated 0 stars on GitHub

A four-operator FM synth inspired by Yamaha’s reface DX, with 33 sounds, editing of each operator and envelope, and two effects. Its README calls it an experimental preview: a first hardware test confirmed boot, playback, and USB MIDI, and the latest fixes still await a retest. It has no GitHub release; it installs from its own browser page and plays in a browser.

mwedmark

Latest 1.2.0 Updated 2 stars on GitHub

A 40-voice, sixteen-channel General MIDI sound module that plays a bank made from a SoundFont (.sf2), converted in the browser and installed separately. Parts can be soloed or muted while a song plays, and more than one sound can be layered on a channel. It installs from its own browser page, which also sends banks, and can be tried in a browser first.

jartificer

In development · Latest 0.9.5 Updated 3 stars on GitHub

A Mega Drive music tracker with VGM export, and a desktop editor on the same engine. Its README says it has been tested on a real FM1, and its site plays it in a browser and installs the latest release.

wootr0p

Beta · Latest 0.6.4 Updated 0 stars on GitHub

A semi-modular mono synth built on OberVave 3.3.2: a VCO, a self-oscillating four-pole ladder filter, an LFO, an ADSR, a VCA, a wave folder, sample and hold, a mixer, and a patchbay with normals and dummy plugs, with four tracks, MIDI clock sync, chorus, delay, reverb, and 90 sounds. It installs from its release package or the FM-1 Firmware Hub.

AntonioAltea

Latest 1.3 Updated 9 stars on GitHub

A Mellotron-style firmware built on Dinghy, playing tapes recorded from a 1973 Mellotron M400S: it mixes two of them and colours them with effects and lo-fi tape effects. It installs from its own browser page and plays in a browser first.

Nacsez

Pre-1.0 · Build 736 Updated 8 stars on GitHub

Six-operator FM and Virtual Analog synthesis with four-track sequencing and songs. FMER Companion, a Windows app, installs it and keeps instruments, projects, and backups on the computer, with DX7 import and export. Build 736 adds Bluetooth MIDI between two FM-1 units.

jsmith13

Latest 1.4.0 Updated 29 stars on GitHub

A six-operator FM synthesizer made for learning FM: no drums or song mode, just the DX7 engine with every parameter under a knob while the sound plays, and a screen that shows what you changed. It has eight voices, 32 user slots, a small arpeggiator and a one-phrase looper, and is built on Dinghy. Its README says it runs on the FM1, and it installs from its release package.

zvenson

Latest 0.5 Updated 3 stars on GitHub

Doom on the FM1, by sloopDX's author: one arena from the free FreeDM, played on the keys and knob with the FM1's screen as the display and synthesised sound effects, but no music. It installs from its own browser page, which can put sloopDX back, and keeps sloopDX's USB rescue. It needs no game data of your own.

czietz

Works with this editorPatches V15 and V16 Updated 11 stars on GitHub

A script that changes your own copy of M-VAVE's V15 or V16 rather than a firmware of its own: operator detune matches Dexed, aftertouch no longer brings a strong vibrato, and the main screen's scope turns dark blue. The FM1 still reports V15 or V16, so this editor treats it as M-VAVE's firmware.

The patched file may not be shared, so you run the Python script yourself. M-UPGRADE sees it as the V15 already installed, so go down to V14 with M-VAVE's tone updater first, then install it; the same steps put V15 back.

smememe

Works with this editorPatches V15 · Latest 1.0.0 Updated 6 stars on GitHub

A patcher, not a firmware, which changes your own copy of M-VAVE’s V15 so that every button, key, and knob sends a USB-MIDI note, fourteen buttons, 27 keys, and seven knobs each way, which an app such as Keyboard Maestro or MidiKey2Key turns into shortcuts. The synth functions go, and so does the settings screen, so set the velocity you want with M-VAVE’s firmware before patching.

The patched file may not be shared, so you download V15 yourself and patch it in the web page or with Python, then install it with M-UPGRADE. Its README says no recovery method is known if an update fails; M-VAVE’s updater puts V15 back.

Latest 0.2.0 Updated 5 stars on GitHub

A stand-alone MIDI processor, with no computer needed. The synth is removed, so the only sound is a metronome click. MIDI from TRS and USB goes through a pipeline and comes out of USB, with a searchable monitor showing what it did to each message, per-port channel and message filters, and message and channel remaps. Event triggers send a list of messages, such as the bank and program changes for a whole rig, from one incoming message. The knobs send CCs, the keys play notes and send program and bank changes, and clock lockout keeps clocks from being merged. It holds 16 named patches, which can be dumped and loaded over SysEx, and it is built on the Official Open V14 source. Latency measured on an FM-1 averages under 0.2 ms. It installs from its own page in desktop Chrome or Edge over USB.

Keitark

Experimental · Source only Updated 20 stars on GitHub

Plays NES games on the FM1: its 27 keys are the controller and its screen the television. It is the worked example in a kit for writing FM1 firmware from scratch, published as source with no installer page or ready-made release, and no game included. It makes no music.

PatttF

Latest 1.02 Updated 20 stars on GitHub

A six-voice Juno-106 emulation, ported from ultramaster_kr106: PolyBLEP oscillators with a sub-oscillator and noise, a 24 dB resonant ladder filter, a four-position high-pass, the 106’s envelope, a BBD stereo chorus, and 128 factory patches decoded from a Juno-106’s SysEx, under Roland-styled screens. It renders voices on both cores, as Melodee does. Its release carries a package to install.

hericdk

FM1 Quest's title art: a pixel-art party of heroes around an FM1 in an autumn forest

Beta · Build 43 Updated 15 stars on GitHub

SLOOP as a pixel-art RPG. The four tracks are four heroes, every lit step is an attack, the tempo sets how fast the party walks, the key picks the biome, effects bring the weather, and recording a loop is a boss fight against the King Slime. Every SLOOP function stays where it was, with the same controls. Its page installs it from Chrome or Edge, and the installer can put M-VAVE's firmware back.

math0ne

fm1-chord's home screen, with the chord C7 above a keyboard

Latest 0.3 Updated 15 stars on GitHub

A chord machine built on Felucca: the white keys at the left play the scale's chords and those to their right strum them, as on an Omnichord, while the black keys add sevenths, ninths, suspensions, and borrowed chords. It adds a chord sequencer, drum loops, a looper, and an ear trainer. It runs on an FM1 but installs from a terminal, with a script from its source.

cotrino

No numbered releases Updated 0 stars on GitHub

A Holy Week firmware built on M-VAVE's FM1 Open V14 SDK, which replaces the sixteen factory projects with original marches for cornets, trumpets, and drums in the style of Semana Santa bands. Its README, in Spanish, says it has been installed and checked on an FM1, though its sounds have not yet been listened to there. Its page plays it in a simulator and installs it over M-VAVE's V15 or Official Open.

joakimeriksson

Latest 0.9.0 Updated 45 stars on GitHub

One firmware, installed once, that holds several synths as modules in flash: hold HOME to pick another, with no reinstall. It comes with CS-1, Scintilla, OberVave, FM-1 SID, and a sine, and its page deploys your own modules over USB and shows the log and the load. Version 0.9 adds Animatek's ATEK303 and KEYS, a clavinet, an electric piano, and a piano from physical models. It installs from its release package or the Firmware Hub.

jartificer

Latest 1.2.0 Updated 14 stars on GitHub

A General MIDI sound module and sequencer with 16 tracks, 128 General MIDI instruments, and a drum kit on track 10. It stores up to 64 songs of up to 128 measures each. Its README says the author tested it on a real FM1. It installs from its own browser page, which also plays it in an emulator, and has a web editor.

chmess

Preview · Latest 0.1.2 Updated 7 stars on GitHub

A first keyboard course: eight chapters from finding middle C, twelve exercises, and thirty traditional melodies, each played to you, lit on the keys, and listened to, with the FM synthesiser and its DX7 presets still behind the learning screen. Its README says the preview has been installed on an FM1 and the whole course still needs playing through. It installs from its pre-release package.

snpwball

No numbered releases Updated 0 stars on GitHub

22 presets, a four-track sequencer, and a battery indicator, built on fm1-base around The Neverhood: its build takes the game's sprites and sounds from the demo ScummVM offers and samples from Terry Scott Taylor's recordings. Its page plays it in a browser emulator and installs it.

DEADACTIVE

No numbered releases Updated 3 stars on GitHub

LSDj, the Game Boy tracker, and DMGo!, the drum machine, run in a Game Boy emulator inside the FM1's firmware, on its screen, keys, knobs, and sound, by Hortator's maker. You bring your own ROM: the install page puts it into the firmware in your browser and installs one of the two at a time, and a simulator tries it first.

Guilherme Ruppert

FMini-1's splash screen: its name above a minimoog-style keyboard synthesiser

Latest 2.6.0 Updated 45 stars on GitHub

A Minimoog Model D emulation, built on Felucca, with onboard effects, an arpeggiator, and a sequencer. Its page installs the firmware over USB from a browser, and an emulator there plays it first. Since 2.5.12 it also builds for the SMK-37.

GuinanNo1

Alpha · Latest 0.4.4 Updated 1 star on GitHub

A firmware after the Korg monotribe: one oscillator, a two-pole filter, an LFO, three drums and an eight-step sequencer, written without Korg code. So far it is an early test build that plays fm1-base’s test voice under its name; the instrument itself comes next. It installs from its own browser page, which also has an emulator, a quickstart and a manual.

ejtb76

Latest 0.4.2 Updated 2 stars on GitHub

A formant synthesiser with a 303-style 16-step pattern sequencer, ported from a VST3 plugin and built on Dinghy. A saw wave runs through a three-formant vowel filter, a resonant low-pass and a ping-pong delay, with vowel, accent and slide per step and 16 stored patterns. It installs from its release package, or through the FM-1 Firmware Hub; the README says the sound engine, controls and sequencer were tested on the FM-1.

Electro-Dig

Test build · Latest 0.51Updated 2 stars on GitHub

A firmware where every track is a function drawn on one pair of axes and played as it is drawn. Its ACID track plays sixteen steps you write, the 303's way, or a formula, through a ping-pong delay and a small room, with punch-in effects. It is built on Dinghy, SLOOP, and Felucca, comes as numbered test builds, and installs from its own web page.

fantasmogenesis

Latest 0.10.2 Updated 3 stars on GitHub

A groovebox on Felucca: eight tracks, four of drums and four of synths, 26 engines with SAMPLE on every track, 32 steps a track with conditions and probability, and eight-track USB audio. Its screen reads in Spanish, English, or Portuguese. It has no GitHub release; it installs free from its own browser page, which invites an optional contribution, and plays in a browser.

konsumer

Latest 0.1.12 Updated 6 stars on GitHub

A nine-track groovebox in which each track plays its own machine: modelled and sampled classic drum machines, your own samples, Felucca’s synth engines, or MIDI out. It has eight 16-step patterns with accents, slides, and ratchets, and sends and distortion. It installs from its own browser page.

Charles Vestal

FoMni's strum screen, with the chord's strings and its chord buttons

Latest 0.4.1 Updated 84 stars on GitHub

A chord harp inspired by the Suzuki Omnichord: the 16 white keys are the strum plate and the 11 black keys pick the chord, with rhythm patterns, an auto bass, and its own effects. It installs from its own browser page, which can also put M-VAVE's firmware back.

mpancia

Latest 1.0.0 Updated 1 star on GitHub

A generative sequencer of four lanes whose sequencing logic is proved in Lean 4, made at a hackathon. Its site has a web installer and a browser simulator, its licence is GPL-3.0, and its README does not say it has been heard on an FM1.

styvesgoupil

Latest 3.4Updated 23 stars on GitHub

An instrument for ambient drones and textures: you latch drones and chords in a key, play icy FM bells over them by hand, through an arpeggiator, or from a 32-step sequencer, and since 2.0 a bass line of its own, all into a large reverb with shimmer and freeze. It installs from the FM-1 Firmware Hub or its release package, and its notes are in English and French.

leonardoMirabal

Latest 0.9.13 Updated 15 stars on GitHub

Physically modelled Fender Rhodes, vibraphone, and marimba with no samples, plus effects, an arpeggiator, a sequencer, scales, and presets. It comes as a release package, and a browser emulator plays it first.

Duncan Macneil

FuMi-1's play screen, with the koto chosen, its name in kanji, and the ST-50's keys

Latest 1.1.1 Updated 21 stars on GitHub

A shigin accompaniment instrument grown from FoMni, inspired by Suikohsha's ST-50: the white keys are its lower row and the black keys its upper row or koto ornaments, in equal temperament or the ST-50's own just tuning, with koto, sho, shakuhachi, flute, and taiko voices on a six-operator FM engine. Its own page installs it and plays it in a browser first.

stephencummins

Latest 1.1Updated 0 stars on GitHub

AISLING FX-1, a fork of AISLING that puts sound from a computer, over USB, through AISLING’s effects. Its README says 1.0 has run on one FM1 with a Mac playing through it, and that its saves share the FM1’s memory with AISLING’s. It installs from its own browser page or its release package.

gybe808-dotcom

No numbered releasesUpdated 1 star on GitHub

A firmware based on Felucca and XOX. It installs from its web installer, in Chrome or Edge, which also has a Back to the stock firmware button.

ChanceTheMaker

Latest 2.0 Updated 3 stars on GitHub

A Game Boy emulator by Doom FM-1 / SMK’s maker. Its browser page installs it on an FM1 or an SMK-37, plays Game Boy cartridges in a simulator, and sends them to a game library on the device over USB or Bluetooth.

fvalente

Latest 1.2.1 Updated 11 stars on GitHub

A synth firmware based on Felucca, with a wavetable sound, a live spectrogram filter, a four-track tape deck, and a song generator with 49 genres. It has a web studio and installs from its own browser page.

npi3pak

Latest 0.6 Updated 8 stars on GitHub

A macro-oscillator firmware inspired by Mutable Instruments' Plaits. It installs from its own web installer.

Jason Persinger

GHOULBOX's skull title screen beside its home screen, with a hurdy-gurdy waveform between two torches

Latest 2.4 Updated 94 stars on GitHub

A Felucca fork for dungeon synth, dark ambient, and fantasy music: a cathedral-sized HALL reverb, a worn-cassette TAPE effect, a hurdy-gurdy engine with tunable drones and a buzzing trompette, and 59 sounds, from crypt pads and monk choirs to a sampled bowed psaltery, chamber organ, and folk harp, all behind an old-RPG screen with a skull at boot. It installs from its own browser page, which saves a full backup first.

GuinanNo1

Beta · Latest 0.3.1-beta Updated 1 star on GitHub

A generative disco machine in the style of Giorgio Moroder: it plays itself from power-on with bass, strings, a lead and drums, across nine song presets you steer by key, pattern and section. It installs from its release package and plays in a browser emulator first. Its 0.3.1-beta notes call it beta, installed on three FM1s so far with no major issues reported, and still advise installing with caution.

saulofilho

Latest 2.0.2 Updated 0 stars on GitHub

A neon-noir groovebox built on GR!MM, by Coqui’s maker: four tracks, seven sources, tape and megacity space effects, scales including Insen, Hirajoshi, and Iwato, and 44 factory sounds after Blade Runner, on a glitched landscape that tears with the sound. Its README says 2.0 was tested on a real FM1, and 2.0.2 not yet. It installs from its release package or the FM-1 Firmware Hub, and plays in a browser emulator.

ttreu

Beta · Latest 0.5.0-beta Updated 0 stars on GitHub

A drone synthesiser built on M-VAVE's FM1 Open: white keys latch scale tones, black keys glide them, with a tape echo, ladder filter, shimmer reverb and a quiet microsound drum track. It installs from its own browser page, and a browser simulator is available. The README says it has run on one FM1 and no licence is stated on GitHub.

ttreu

Beta · Latest 0.3.0-betaUpdated 0 stars on GitHub

A drum machine for fine glitch and microsound beats, built on M-VAVE's FM1 Open: every sound is synthesised (clicks, click trains, digital crunch, noise snaps, micro kicks), loops can mutate from bar to bar, and stutter, ratchet and reverse effects sit on the keys. Its README says it ran on one FM-1 in October 2026, with a CPU load below 30%, and no licence is stated. It installs from its own browser page, and a simulator is available.

kpalaniuk

Latest 1.0.0-r12 Updated 6 stars on GitHub

Easy, kid-friendly firmware built on Felucca, with sound pictures instead of menus, four colour knobs, and a singing gnome. It comes as a release package, installed with a Python script.

Gadlele

Latest 1.3 Updated 12 stars on GitHub

One analogue-style synth laid out like the microKORG, a Felucca fork with two oscillators, five filters, two envelopes, two LFOs, a patch bay, an arpeggiator, and a step sequencer, every page drawing what it does. It installs from its own browser page and plays in a browser first.

dzwerg

Beta · Latest 0.2.2-beta1 Updated 0 stars on GitHub

A fork of Golana that adds a 64-step sequencer, a song mode, and USB MIDI out. Its README says these were tested on a physical FM1. It installs from its release package.

barnierg76

Latest 1.0 Updated 2 stars on GitHub

A wavetable synthesiser with a 32-step sequencer, its engine written for the FM1 rather than ported from the Golf plug-in, whose wavetables and 96 of whose presets it uses: two morphing oscillators with unison and warp, sub and noise, a filter with five types, two envelopes and two LFOs, and drive, OTT compression, chorus, delay, and reverb, with 168 presets. It installs from its own browser page, which can put the stock firmware back.

GRiMMBIENT

Latest 2.0.2 Updated 54 stars on GitHub

Dark ambient, dungeon synth, and deathdream firmware: four drone and atmosphere tracks with seven sound sources, long dark effects, and a 64-step sequencer per track. It installs from the Firmware Hub, or by hand from its release file, and has a browser version and an editor.

pjac1810

Latest 0.1 Updated 0 stars on GitHub

A 16 × 16 light-grid sequencer instrument after Yamaha's Tenori-On, by SPELLBOX's maker, on foma, with a song of 16 blocks saved to flash. All its sounds are synthesised. It installs from its own browser page.

Peter Gombos

Groove OS's tracks screen, with drum, acid, and FM tracks

Paid · Latest 2.0 Updated Not on GitHub

An eight-track groovebox that keeps an FM synth and adds a virtual analogue synth and drum kits, with a 64-step sequencer with parameter locks, a six-effect mixer, and a performance mode with scenes. Version 2.0 adds a sampler that records from a phone over Bluetooth or USB, or from the FM1 itself, Bluetooth audio, and a wider stereo mix; 1.4 owners update to it free. It installs from its own browser page, which can also put M-VAVE's V15 back, and has a browser emulator to try first.

stoogs

Beta · Latest 0.1.0-beta.1 Updated 2 stars on GitHub

A six-string guitar strummer for the FM1, with 16 instruments, chord parts, strum patterns and fourteen tunings. It installs from its beta release package (.fwsc). The README reports it installed and played on one FM1, while recovery restoration after an interrupted write is untested. A browser simulator is available.

Marc Massé

Guru-600's HOME screen: its filter readouts above a ring of coloured bars

Latest 1.3.1 Updated 8 stars on GitHub

A Prophet-600 emulator built on Felucca: two oscillators per voice with sync, a 24 dB filter with its own envelope, Poly-Mod, an LFO and six voices, with 255 sounds including the P600's 100 factory programs, MORPH and MUTATE, and P600 .syx transfer. Felucca's four tracks, sequencer and other engines stay. It installs from its own page in Chrome or Edge, with a browser editor and a user guide in seven languages.

jakehandy

h1

Latest 0.3.0Updated 15 stars on GitHub

Fourteen instruments, each a full-screen animated picture you play, from lo-fi keys and analogue pads to chiptune, plucked strings, and a drum kit, with eight algorithms and four live knobs, a loop recorder, a step sequencer, an arpeggiator, and a metronome. Its README says its releases have been installed and played on one FM1. It installs from the FM-1 Firmware Hub or its release package, and plays in a browser simulator.

sparky480v

Latest 1.0.1 Updated 2 stars on GitHub

Generative dark ambient, by DARK-1's maker: drones, choirs, bells, and 135 sound effects that change by themselves across 15 worlds, with 40 melting pictures, while the keys play bells or latch choir voices. Its README says it works on FM1s with either flash chip. It installs from its release package with an FM1 web installer, and plays in a browser emulator.

davidpryan

Latest 0.1 Updated 1 star on GitHub

Five generative firmwares for haunted ambient music with meaningful controls: Halflight, Midnight, Untrue, Voicemail, and Worntape. Its flasher page installs any of them from Chrome or Edge, and the release carries a package for each.

plieuw

Latest 2.1.7 Updated 1 star on GitHub

A chaotic synthesiser whose oscillator is Chua's circuit, with each voice a circuit solver and the screen drawing its attractor live. It adds Rings-style resonators and waveguides and a shimmer reverb, on a cut-down Felucca base. It installs from its release package (.fwsc) or the installer page that GitHub builds. The README is in Dutch.

benbadio

Latest 1.1 Updated 1 star on GitHub

A chord groovebox after Roland's AIRA Compact J-6, built on Dinghy: 100 chord sets, nine phrase styles of 12 variations each, and a 64-pattern step sequencer. It installs from its own browser page, which can also put the factory firmware back, and its Workbench plays it in a browser.

bendawsonjr

Latest 1.3 Updated 0 stars on GitHub

A Melodee 1.6.1 fork for catching an idea fast, as a chord, a strum, a loop, or a hook, with HERA’s chord sets and features after SLOOP. It installs from its own browser page, which backs the FM1 up first and can put M-VAVE’s V15 back.

DEADACTIVE

Latest 1.0.1 Updated 64 stars on GitHub

A drum machine built on Felucca: eight drum tracks of 808, 909, and Plaits drum models and samples, a 64-step sequencer with motion recording and songs, Mutable Instruments' Grids, a compressor for ducking and pumping, resonators, and live performance effects. It installs from its own browser page, plays in a browser first, and leaves through M-VAVE's M-UPGRADE.

Adam Wilson

Latest FM-1_797 Updated 0 stars on GitHub

A spoon-feeding balance game: keep the bean in the bowl, approach an increasingly grumpy face, and tip the spoon to deliver the bite. Its FM-1_797 release carries the package, its source, and a quick-start guide, and its notes say it was verified on an FM1 with the original flash chip. It installs with the USB MIDI installer in its source archive.

RustyPawz

HYP-1's panel on an FM1, with its home screen showing a chord ring

Experimental · Latest 1.5.65 Updated 32 stars on GitHub

A generative techno machine built on AMB-1, with MIDI out per voice. It installs from its own browser page, which can also put M-VAVE's firmware back. The same page offers four more experimental RedtailWorks firmwares: LOF-1, ECO-1, and GRAV-1, which its README says have not yet run on an FM1, and, since 22 October, CTY-1, in which a growing city plays the FM1. Since 6 November the repository also has BIT-1, a generative 8-bit tracker with an install page of its own, which its README says has run only in the simulator and the browser emulator.

darrenjaworski

Latest 0.0.1 Updated 0 stars on GitHub

A generative ambient firmware in which voices drift on their own slow timers inside Impressionist harmony: whole-tone and pentatonic scales, extended and quartal chords, and planing over a pedal tone. It is built to drift rather than be played. It installs from its release package, and can be tried in a browser emulator first. Its README does not say whether it has been tried on an FM1.

devrvega

Latest 0.2.1 Updated 1 star on GitHub

A self-playing industrial machine after the records of KMFDM, Nine Inch Nails, and Ministry: it starts as soon as it is switched on and arranges its own songs, with song and drum editors. It installs from its own browser page.

j0kerpack

Latest 1.19.5 Updated 5 stars on GitHub

A virtual analogue polysynth modelled on the Access Virus, which its README says is compatible with Virus patches: three oscillators a voice with a sub oscillator, noise, and a ring modulator. Its README says it runs on both FM1 hardware versions. It installs from its own browser page, which has a guide.

JackieAlacrity2373

J6

Latest 1.4.0 Updated 3 stars on GitHub

A six-voice polysynth after the Roland JUNO-60, built on fm1-base: band-limited saw and pulse oscillators with a sub and noise, a 24 dB resonant filter, one shared envelope, an arpeggiator, and a status page with a pattern strip. It installs from its release package with the Firmware Hub installer.

BunnyOrchard

Latest 1.2.0 Updated 0 stars on GitHub

A generative groovebox: it starts playing on power-up, and each boot makes a new song that you can mutate, change scale and tempo of, and jam along with. It has sampled instruments, drums, a recorded keyboard loop and four live effect knobs. It installs from its release package (.fwsc) over USB, with a command-line installer in the repo; the README says installing is at your own risk and gives steps to restore M-VAVE's firmware.

Gjelly

Latest 1.0b Updated 7 stars on GitHub

A groovebox built on Dinghy and Felucca, with three synth tracks on 24 Plaits engines, 128 starting sounds, and a four-lane drum kit. It has a pattern sequencer with an arranger, effects on each track with a shared reverb, LFOs, and twelve named project slots that its browser editor imports and exports. A build for the SMK-37 Pro, JamesOS-K, comes with each release. It is pay what you want, free included.

Philip-Bos

Latest 0.2.3Updated 11 stars on GitHub

A backing band: drums, bass, chords and a synth follow a chord progression in any key, in time with your loop pedal. It comes as firmware with a companion web app, and installs from its web flasher or the release package.

JanSchulten

Alpha · Latest 0.2-alpha Updated 11 stars on GitHub

An OP-1 and OP-Z-inspired Felucca fork: four tracks, sixteen scenes per project chained into songs, two lanes of FX tracks with live punch-in effects, J-6 chord sets, and engines that include a Volca Drum-style drum machine, an 808, five after Plaits, and a TB-303-style bass. It installs from a local page in Chrome or Edge, and a manual in English and German is online.

zednaked

Jangada's tracks screen, with four tracks in magenta

Alpha · Latest 1.0.1 Updated 39 stars on GitHub

A Felucca fork with a dark, industrial, and Brazilian accent: twelve engines, among them a six-operator FM, a superwave analogue, and physical models, four tracks, a modulation matrix, ratchets, drones that hold and evolve while you play, and drum kits of its own, with 49 factory beats that each have a fill. It installs from its own browser page, and Jangada Studio plays its sound in a browser.

JazzyRhythmer

Beta · Build 20261111.1 Updated 5 stars on GitHub

A sound-exploration instrument on Rhythmer and JIANT, with 31 engines and over 1,200 factory sounds, one sound to a track, a step sequencer with automation, GEN for drafting parts, the Amen and Think breaks, and USB MIDI host. It installs from its own browser page and plays in a browser.

DanielGilbert

Beta · Latest 0.1 Updated 0 stars on GitHub

A groovebox for jamming, made to be easy to pick up: drums, bass, an arpeggiator that follows the pad’s chords, a pad, and a lead, in patterns and a chain, with the keys lit to show what fits the key, starter grooves, chord progressions, a demo song, undo, live recording, and a mixer for each pattern. Its release has builds for the SMK-37 keyboards too. It installs from its release package.

Guizmoh

Beta · Latest 0.9 Updated 16 stars on GitHub

A tracker with a sample importer, a manual and a browser emulator. Its README calls 0.9 a beta tested on a real FM1, with an install tested against simulated power cuts. It installs from its own browser page.

juanjiant-bit

JIANT FM's reference sheet, with its screens and controls

In development · Latest V10.7.58 Updated 262 stars on GitHub

A Felucca fork with SLOOP's song system, made for playing live and building whole songs without a computer. It installs from its own browser page and has a web editor and a browser emulator. It has no numbered releases: the version shown, V10.7.58, is the public version its README names and its installer offers first, with earlier versions under it, and V10.7.63 is a beta. V10.7 keeps six songs rather than eight. It is still in development, and its author advises backing up the flash before installing it.

kjs4discovery

Beta · Latest 0.10.6 Updated 0 stars on GitHub

A play-along firmware: the band plays drums, bass, harmony, and melody, you mute one part, and the screen shows it to play as chords, keys, ukulele, or bass tab. It has 15 songs and 42 backtracks built in and a synth mode with presets. Its README calls it beta, tested on one FM1. It installs from its release package.

BlackKittenDevices

Latest 1.5.0Updated 8 stars on GitHub

A Eurorack in your hands: over 50 modules patched together with cables on the FM1 itself, with a sequencer that records what you play, an oscilloscope and animated visuals, MIDI learn and USB audio. A patch is a whole rack, and a web editor builds it too. It installs from its release package.

kurzhaar168

Latest 1.1 Updated 0 stars on GitHub

A monophonic bass synth and step sequencer on Dinghy, named for a German Shorthaired Pointer: two oscillators and a sub into a resonant ladder filter, two LFOs, drive and reverb, 16 presets, and 16 patterns in your key and scale, with MIDI clock sync and recording over USB audio. It installs from its release package with a command-line installer.

guizmoh

Beta · Latest 1.2.1b Updated 6 stars on GitHub

A bass synth for dubstep, drum and bass, dub and techno, with nine oscillator engines, three LFOs, a morph between sounds, effects and a drum sequencer with parameter locks. The README calls it beta, tested in the emulator and by automatic tests but not on every FM-1 yet. It installs from its own browser page, or from its release package.

eatyourgreensstudio-dotcom

Latest 3.1.5 Updated 30 stars on GitHub

A four-track groove machine with a TB-303 or Juno-style track, physical modelling, Plaits models, a drum synth, a 64-step sequencer and generators that keep writing parts as you play. It also works as a USB audio and MIDI device. It installs from its own browser page or its release package, and its 3.1.4 notes say it was tested on an FM1.

dzwerg

Beta · Latest 0.5.42 Updated 1 star on GitHub

A controller, MIDI router and four-track pattern and song arranger, with a LIVE PLAY mode that picks patterns from the keys and USB, BLE and TRS MIDI. It is built on CTL-1 and fm1-base. It installs from the .fwsc package on its release page, following its flashing guide. It is a community beta, and the README reports LIVE PLAY working on hardware.

WillCMcC

Latest 0.1 Updated 1 star on GitHub

A toy for toddlers: the keys play nursery songs, say and show letters, count, or play their own notes, the buttons are drums, and there are no menus. It comes as a release package.

kosmar

KO

Latest 0.1 Updated 0 stars on GitHub

A family of firmwares, each one instrument with its own identity: twelve genre grooveboxes on one engine, among them DUB, HOUSE, JAZZ, TECHNO, and HIPHOP, with KO BASS, a bass synth, KO KIT, a drum kit and sequencer, and KO JET, which its README marks as work in progress and not yet tested on hardware. All are version 0.1 with no GitHub release; its browser page installs each over Web MIDI and plays it in an emulator.

Xforsa

Latest 0.5.2Updated 2 stars on GitHub

Dark industrial and EBM firmware built on Felucca, with Glitchbox's GLCH engine brought over: 171 sounds in 13 engines, 13 drum kits, DICE to write a new part in one of eight moods, and DAMAGE on the master. Unlike Glitchbox it supports the newer FM1s' flash chip. It installs from its own browser page or its release package.

doohinkus

Latest 0.15 Updated 1 star on GitHub

A Christmas phrase game: the FM1 plays the start of a public-domain carol and you replay it on the keys, each level adding three notes until the whole song, with four carols to choose from. It installs from its own browser page, which also plays it in an emulator, and has a manual.

blackkittendevices

Beta · Latest 2.8-kitten.14 Updated 7 stars on GitHub

A groovebox firmware built on SLOOP, Felucca and FMini-1, with four synth parts, two drum parts and a Minimoog-style engine. It records its six tracks and the stereo master to a DAW over USB as eight audio channels. It installs from the .fwsc package or installer zip on its release page. Its README says the author tested it on a real FM-1.

OSCILL/R

The L/RRY card: a stereo-field morphing synthesiser by OSCILL/R

Beta · Latest 0.1.0-beta Updated 4 stars on GitHub

A stereo-field morphing synth: two oscillators with eight models, a sub, noise, and ring modulation, and two filters and two dirt stages, each with its own pan, so moving the pans moves the sound around you. A morph glides between two versions of every patch, with effects and a mod matrix; best heard on headphones. A beta that has run on one FM-1, its author’s. It installs from its own browser page, with a web editor and a cheat sheet, and plays in a browser emulator.

DJ Redacted

Experimental · Latest 0.2 Updated Not on GitHub

A two-bar Latin-rock percussion loop with a cabasa, and an eight-voice tonewheel-style organ played on the keys, with drive, a rotary effect, and reverb. It installs from the same browser page as REDACTED, which says it still needs testing on an FM1.

megagott

Experimental · Latest 0.3.2 Updated 0 stars on GitHub

MYCELIUM's sibling: playable synth sounds with lightshows on a Novation Launchpad Pro MK3, triggered from the FM1's keys. A browser companion previews shows and updates the firmware, which installs from its release package.

devrvega

Latest 0.1.2 Updated 4 stars on GitHub

A pocket groovebox: four tracks, a drum machine and three synths, playing 16-step patterns that chain together, with 808, 909, arcade, and rhythm box kits, chords the synths follow, parameter locks, ratchets, slides, swing, and sixteen punch-in effects. It is built on Felucca by way of X0X, AMB-1, and IND-1, installs from its own browser page, and can be tried first in a browser emulator.

FLEXOR-R

Latest 0.9.70Updated 9 stars on GitHub

A hardcore and breakcore break chopper built on CHOPPAH: a break cut into sixteen slices, effect pads, and 64 patterns, driven by a kick with its own synth, distortion, and KICK LAB, a live sequencer with conditions and nudge, and tracks with builds and drops. It plays kicks and drums only. It installs from its own browser page, which also plays it in an emulator and has a manual.

Co-oscillator

Latest 0.1.0 Updated 5 stars on GitHub

A five-track synthesizer, sampler, and groovebox built on Felucca: four polyphonic tracks and a drum track, fourteen engines including wavetable, six-operator FM, granular, and tape-scrub sampling, a 64-step sequencer, a chord progression generator, and an arpeggiator. It has a web workbench with an emulator, and installs from its release package.

charlesvestal

Latest 0.17.1 Updated 87 stars on GitHub

A pocket groovebox of eight tracks on eight synth engines, a sample player, a break slicer, and a drum kit, with a 64-step sequencer and parameter locks, weave, which crosses two patterns, throws, a conductor track, two send-effect tracks, and scenes and a song. It installs from its own browser page, with an emulator to try first.

jaak-stjaaques

Pre-release · Latest 0.1.2Updated 0 stars on GitHub

A four-tape instrument: each tape loops at its own length through its own Karplus–Strong string, tube, or blow resonator, with global scales, an arpeggiator, strums, a delay and hall, and snapshots, and notes that fade one by one with Memory Leak. Its release notes say installing it on a physical FM1 still needs checking. It installs from its release package.

dreamsofbacon

Alpha · Latest 0.9.97 Updated 2 stars on GitHub

Little Sound Dj, the Game Boy tracker, on the FM1, played from its keys and knobs, with filters, drive, lo-fi, and an LFO on each channel, a shared echo, reverb, and compressor, MIDI sync, and colour themes. A GameDude fork, formerly called LSDj for FM-1, it does not include LSDj: its page adds your own copy to the firmware. Its README calls 0.9.97 alpha. It installs from its own browser page, which also plays it in an emulator and controls it live over USB.

Reytian

Latest 1.0.2 Updated 2 stars on GitHub

Peking opera percussion and jinghu accompaniment: learn the percussion patterns by playing along, or sing an aria with its own band. Its README says it runs on an FM1, though most of its testing has been in a simulator. It installs from its release package.

orbitator

Alpha · Latest 0.1 Updated 6 stars on GitHub

A drum machine firmware with eight LXR-style sounds, a sample layer using the original LXR transients, parameter locks, song mode and MIDI clock. It installs from its own browser update page, which carries the latest build. The README is in German and says it has been tested on a computer but never run on an FM-1. Its only GitHub release is an unsigned iPad emulator app.

spinnicholas

Latest 1.4.0 Updated 1 star on GitHub

An experimental event-memory synth designed for low-vision musicians, with large high-contrast symbols, a protected Anchor idea that evolves into phrases, 100 presets and chorus, delay and reverb. It installs from the .fwsc package in its release. Its release says the author confirmed this build on a physical FM1 on 2 November.

daviddwlee84

Latest 0.8 Updated 0 stars on GitHub

A pocket Morse code machine on fm1-base: key on the piano keys and read what you sent, drill short and long presses, learn the code by sound with flash cards, and listen to endless practice, with a straight key or iambic paddles. Its web page shows what the FM1 reads and backs up your progress. It installs from its release package.

HistoryOfSky

Latest 1.0.3 Updated 23 stars on GitHub

A riffbox for rock and metal built on SLOOP: guitar, bass, and drum samples, an amp engine with cabinet impulse responses, pedals and guitar effects, and SLOOP's synth engines, with bends, whammy, wah, and palm mutes played live and a four-track recorder for turning riffs into songs. It installs from its own browser page, which also writes its sound pack, and has a web editor. It does not open projects saved by SLOOP 2.6 to 2.8.

eldontyrellcorp

Latest 1.00 Updated 1 star on GitHub

Stephane Schmitz’s Jupiter-8-style synth, built on Mini-Tone’s platform and the synth and panel of jupiter8_esp32: eight voices in Whole, Dual, Split, or 2-Part modes, two VCOs a voice with sync and cross modulation, a high-pass filter and a 12 or 24 dB ladder, two ADSRs, an LFO, an arpeggiator, polyphonic portamento, 64 patches, chorus, and 17 multi-effects. Its README says it works on both FM1 board versions. It installs from its release package.

altessproduction

Alpha · Latest 0.1.2 Updated 0 stars on GitHub

A Casio MT-40 clone on Felucca, with its notes in French: the six 1981 accompaniment rhythms, among them ROCK, the pattern behind the Sleng Teng riddim, with four drum lanes, a bass that follows a one-key chord, FILL, A/B variation, and swing, while Felucca's engines stay playable on the keys. Its alpha release carries a package for Felucca's web installer, and it plays in a browser emulator.

bk40-home

Latest 2.6.3 Updated 2 stars on GitHub

A JP-8000-style virtual analog, ported from the JT-8000 for the Teensy: Super Saw, the JP filter, multi-effects, delay, a plate reverb, an arpeggiator, a two-track sequencer, and 64 programs on eight voices, with upper and lower layers or a split. Releases come as updater files, with builds for the SMK-37 keyboards too.

bk40-home

Latest 1.5.2Updated 7 stars on GitHub

A port of Synth2, the open recreation of the freeware Synth1, that plays Synth1’s .sy1 patches with all 99 parameters: two oscillators and a sub, five filter types, two LFOs, effects, delay, chorus and Synth1’s arpeggiator, on eight voices. It holds 1024 patches of your own, with a browser patch library to send and read them. Releases include builds for the SMK-37 keyboards too.

node56

Experimental · Latest 0.24 Updated 0 stars on GitHub

Music lessons on the FM1’s screen, with note-reading, rhythm, and sight-reading drills graded on pitch and timing; its later builds add FM piano sounds and a sheet-music recorder. Built on Dinghy over Felucca, it installs from its own browser page as a test build, while its README still calls the on-device side a scaffold.

delirioux

Latest 1.4 Updated 2 stars on GitHub

A generative groovebox in the style of early-90s PC tracker music, formerly called Espada. Six lanes play parts composed live in one of ten styles, which you queue and blend. It installs from its own browser page, which can bring back M-VAVE's V15, and plays in a browser first. Its README says it runs on an FM1.

okumurari2

MAKU's pulse screen, with a waveform and a mix of four voices

Latest 1.0 Updated 25 stars on GitHub

An always-on ambience machine built on Felucca: power it on and a new, random, in-key world is already playing, made of a pulse, a floor, a haze, and a voice, each with its own volume knob and three macros. Nothing is saved but the worlds you like, marked with REC, and the next ones grow from your taste. It plays in a browser first, and installs with a Python tool or a browser installer that takes any FM-1 package, such as the FM-1 Firmware Hub.

stets43

Latest 1.0.6 Updated 5 stars on GitHub

Generative just intonation: two layers of moving points wander a map of 41 scales and play the notes they pass, and a rhythm without a grid drives four drums that follow the synth, steered by four knobs and played into from the keys. Its README says 1.0.3 added FM1s with the newer flash chip. It installs from its own browser page or its release package, and plays in a browser emulator.

delirioux

Latest 1.1 Updated 0 stars on GitHub

Generative Latin grooves: a band on the clave in twelve styles, from salsa and mambo to bolero, bossa, and tango, with sampled percussion, piano, brass, sax, violins, and double bass, which you lead with hits while taking the trumpet solo on the keys. It installs from its own browser page or its release package, and plays in a browser.

mongio

Latest 1.8.1 Updated 0 stars on GitHub

A granular sample player in the spirit of the MicroGranny 2, with four sample layers, lo-fi effects, an arpeggiator, a sequencer and 64 named presets. It installs through an editor page in its release, which also loads your own samples, or from the release packages. The README says it was tested on a real FM1, and its interface is in Italian.

thecemeterygates

Latest 0.1 Updated 0 stars on GitHub

A four-track sample tracker and rack sampler built on zp12, SLOOP, Felucca, and Ketch: 128 instruments with tables, grooves, and modulation, 24 samples in about 730 KB, and a sampler page on the FM1 that records the computer's sound over USB. Its web page prepares samples, syncs them to the FM1, and backs it up. It installs from its release package.

glvno

Latest 1.23.0 Updated 10 stars on GitHub

A recursively modular synth engine framework: build instruments from oscillators, wavetables, granulators, Karplus-Strong, noise, modulators, filters, envelopes, sequencers and more. It ships with engine analogues of classic synths such as the Minimoog, Juno-106, Prophet 5 and MS-20, and shows how much of the FM1's hardware each engine uses. It installs from its own browser page and has an emulator.

dspaudio

Latest 1.2.0 Updated 7 stars on GitHub

An original four-part groovebox: three melodic parts with 128 presets, and a sixteen-lane drum part with eight kits, with song arrangement, an arpeggiator, and recorded knob movement. Version 1.2.0 replaces the engine behind its 112 LA sounds and all of those sounds. Its release is a package tested on a device, and it installs from its own browser page, with a browser emulator to try first.

keremimo

Melodee's Stage, Sounds, Notes, Mixer, Drums and Song screens

Latest 1.6.1 Updated 219 stars on GitHub

A Felucca fork with a Stage interface of its own, which puts the four tracks and their live controls on HOME, an on-device sound designer, and engines of its own, among them CZ-1, which plays Casio CZ-1 tones, with all 64 of Casio's preset tones, and takes Casio's SysEx, and PROPHET, which plays Prophet-5 programs, with all 200 of Sequential's factory programs, and takes Prophet SysEx. It installs from its own browser page, which saves a backup first and can return the FM1 to M-VAVE's V15, and it has its own web editor. Since 1.3.4 it has no OVERCLOCK menu, because the 320 MHz clock it offered could drop some FM1s into UBOOT. Its 1.3.5 adds a boot stub that can recover an interrupted update, though installing it over an earlier Melodee or M-VAVE's V15 is still unprotected until the stub is written, and its author has not yet tested that recovery on hardware.

daviddwlee84

Latest 0.4 Updated 1 star on GitHub

A stage metronome by MORSE’s maker: sixteen songs on the white keys, each with its own tempo, meter, step pattern, and sound, changing at the next bar, with tap tempo and meters up to 7/8. A web page plans the setlist and sends it over USB. It installs from its release package and plays in a browser.

ignis32

Latest 0.5 Updated 5 stars on GitHub

A MIDI monitor in the look of a green phosphor terminal. It watches notes, controllers, and clock from TRS, USB, USB host, and Bluetooth, with filtering, and routes messages between those ports as a matrix. It comes as a release package, not a page that installs it.

NickCulbertson

No numbered releases Updated 0 stars on GitHub

Eighteen casual games, by Mighty Arp’s maker, that make generative music as you play: each game is a sequencer whose board, cards, or balls are the notes, with drums joining as you get further. It installs from its own browser page and plays in a browser emulator.

NickCulbertson

Latest 1.5 Updated 3 stars on GitHub

A four-operator FM and subtractive hybrid synth built around a chance arpeggiator: you hold a chord and set the chance, and the arpeggiator decides when each note plays. It adds a 32-step sequencer, 50 sounds, strummed chords, a chorus, a ping-pong delay, and a shimmer reverb, 16 presets of your own, and MIDI and clock in and out. It installs from its own browser page and plays in a browser emulator first.

MichaelAPerry

Miku-FM's Stage screen: a pixel-art Hatsune Miku with the syllable dial below her

In development · Latest 0.9 Updated 3 stars on GitHub

A singing songwriter. A pixel singer sings your songs in Japanese, consonants and all, over FM chords, bass and drums, in a voice synthesised live rather than sampled. You shape her voice with five characters, effects, harmony, whisper and fry, write patterns or let GEN write a whole song, and watch her dance. From 0.7 the chords and bass play on a six-operator DX7 engine, and it takes MIDI input. It installs from its own page in Chrome or Edge and has a browser emulator. The code is GPL-3.0-only; the singer is Hatsune Miku fan art under Crypton's Piapro Character License, free and non-commercial use only.

Reytian

Latest 0.2.2 Updated 7 stars on GitHub

A small minimalist ensemble that plays itself from the moment it starts, in the manner of Philip Glass: repeating figures, slow chord cycles, and processes you can hear, in four models. You take over as much as you like, playing chords, bringing parts in and out, and recording songs. It installs from its own browser page.

eldontyrellcorp

Latest 1.0.5 Updated 6 stars on GitHub

Stephane Schmitz's firmware based on Felucca 1.5, with six tracks instead of four and new engines, five of them based on Elektron machines, plus Braids, a TB-303, and SID. It adds a ping-pong delay and a reverb of its own, and installs from its release package.

eldontyrellcorp

Latest 1.0.1 Updated 1 star on GitHub

A wavetable synthesiser after Roland's n/vision, forked from Mini-Tone. Two wavetable layers with 63 tables, a sine-fold wave shaper, phase modulation, and a choice of filters, with the interface drawn after the n/vision's. It keeps Mini-Tone's TR-808 engine and installs from its release package.

galfaroth

Beta · Latest 1.0.1 Updated 9 stars on GitHub

A six-track synth forked from Hortator 0.23.3: six monophonic tracks of synth and FX machines, pages of eight knobs, a resonant filter and a tape delay on every track, three LFOs a track, and parameter locks and slides. Its README says it has been tested on one FM1. It installs from its own browser page, which also plays the real firmware in a browser.

Charles Vestal

Mocky's welcome screen, which says to plug in USB and open its page in Chrome

Latest 0.9.2 Updated 4 stars on GitHub

A developer tool, not an instrument: it shows pictures sent from a web page on the FM1's screen, to check screen mockups on the real hardware, and can keep up to 64 in flash. It installs from its own browser page.

hirakos999

Beta · Latest 0.3 Updated 1 star on GitHub

A semi-modular drone synth played like a Kaoss Pad: four oscillators sound all the time and modulate each other, while the keys move a cursor on an XY pad, with gestures, a sequencer, and eight generative environments. It installs from The Firmware Hub or its release package.

WiggisModular

Latest 1.0.3 Updated 4 stars on GitHub

A modular synth after the Nord Modular: its web app builds patches from modules, maps their parameters and the knobs through a matrix, and uploads them to the FM1, which steps through patches and modules and adds an arpeggiator with Euclidean rhythms and chaos. Version 1.0.3 plays four voices. It installs from its release package.

bunglesociety

Beta · Latest 0.3 Updated 7 stars on GitHub

Film-music firmware built on Felucca. Its README says it runs on the author's FM1 and has not been tested on other units. It installs from its release package.

markterm

Monohull's screen

Latest 0.2.0 Updated 1 star on GitHub

A monosynth of one voice, with the whole CPU spent on it: analogue-modelled oscillators, five filters (transistor ladder, diode ladder, OTA cascade, Sallen-Key, and state-variable), unison, a Juno-style chorus, delay, reverb, and 14 factory presets. It shows up over USB as a MIDI device and keeps nothing in flash, so other firmwares' projects and samples are left alone. Its README says it has been tested on a real FM1.

jaeggerr

Beta · Latest 0.3 Updated 2 stars on GitHub

A tracker with eight tracks, instruments you build yourself, three effects a step, and songs kept as plain text files that an LLM can write. Its README calls it a beta tried on a real FM1 every day, and it installs from its own browser page, plays in a browser, and has a manual.

slothpallas

Beta · Latest 0.4.1Updated 3 stars on GitHub

A sad wavetable synth forked from FiMba-1: eight tables and six voices, a toy-keyboard backing band of 13 gloomy beats with an auto-bass, and a pixel creature in a rainy alley whose face shows the sound. Its README calls it a beta tested on a real FM1. It installs from its own browser page, which also plays it.

benbadio

Latest 1.0.0 Updated 1 star on GitHub

An eight-track groovebox after Propellerhead's ReBirth, with an 808, a 909, two 303s, Amen breaks, an FM lead, a sub synth, and a MIDI track, sequenced in the style of Reason's Matrix. It installs from its own browser page, with an emulator and a manual.

theowecker

Latest 1.0 Updated 0 stars on GitHub

An ambient firmware on fm1-base: lo-fi, nature scenes, and slow generative loops, with a looper that listens to what you play. It installs from its release package.

kidbee85-beep

Latest 2.3 Updated 35 stars on GitHub

Kid Bunka's six-track instrument built on Mutable Instruments' open engines: start from one of 272 factory Biomes, let its patterns evolve, then link up to eight sections in the Journey Arranger and record the moments to keep, with a six-track sequencer grid, 632 tone presets, and USB audio with each voice on its own input. Its notes say 2.0 was tested on an FM1. It has a browser instrument and hardware editor, an illustrated walkthrough, and installs from its browser installer or release package.

megagott

Test build · Latest 1.0 Updated 5 stars on GitHub

Forest, Psytrance, Goa, and Hitech grooves, built on Felucca and SLOOP, with its own drum assets and icons. Its release is a test package, with an installation guide on the maker's site.

superposition

Latest 0.1.0 Updated 2 stars on GitHub

City pop and coastal firmware: nineteen genres, ten urban and nine coastal, that play themselves while you steer, each with ten jam pieces on the firmware’s own FM, analogue and percussion engines. It installs from its own browser page, which also plays it in an emulator.

FartyPants

Latest 1.0.2 Updated 25 stars on GitHub

A generative Berlin School instrument after Tangerine Dream, Klaus Schulze and Ashra: long, repeating sequences and slowly evolving textures that play themselves, with the white keys giving a melody in the piece's key and the firmware answering what you play. It was called BERLIN while it was built. It installs from its own browser page and plays in a browser emulator.

fenderberg

NCC

Latest 0.7 Updated 14 stars on GitHub

Novation Circuit Companion, a Felucca fork that turns the FM1 into a two-part synth for the Novation Circuit Tracks: part L plays the Circuit’s MIDI 1 track and part R its MIDI 2, with twelve engines and 161 sounds picked by role, and the Circuit’s eight macro knobs mapped to each engine’s parameters. It has no sequencer of its own: the Circuit plays the notes and sends the clock. It installs from its own browser page, which can return the FM1 to V15.

Mr-Roboto

Latest 1.0.0 Updated 1 star on GitHub

A groovebox based on Hortator, with eight tracks of drums, up to two acid bass voices, 64-step patterns, a remix mode, a TB-3PO generator, Grids, motion, parameter locks, and per-track LFOs. It installs from its own browser page, which also runs it in a simulator.

LotionOnTheSkin

Latest 0.2 Updated 0 stars on GitHub

A synthwave groovebox forked from Felucca: Juno-style pads, supersaw leads, basses, and 80s drum machines, about 220 presets sorted by role, and a sequencer that follows one chord progression across every track. Its README says it was tested on a real FM1 and calls it a young project. It installs from its release package.

evanyerburgh

Latest 0.3.1 Updated 21 stars on GitHub

A drone synth with two always-on drones you tune, shape, and move rather than play note by note, inspired by the Stylophone CPM DS-2, the Moog Subharmonicon, and the Soma Lyra-8. Version 0.3 redraws every page and adds sixteen presets, eight gestures, and eleven tunings; 0.3.1 runs heavy sounds more smoothly. It installs from its own browser page, which also plays it without an FM1.

SylarPu-X

Experimental · Latest 0.1.0-green2 Updated 1 star on GitHub

A cyberpunk-inspired performance synth with a sequencer, effects, and a browser studio. Its README says the package has booted on one FM1 and passed its protocol tests there. It installs from its own browser updater.

NjamesZ

Release candidate · Latest 6.28-rc5 Updated 0 stars on GitHub

A Felucca-derived firmware of moving harmony and played MIDI. Its README calls 6.28-rc5 an experimental review candidate, installed once on an FM1 on 10 Nov, with its listening, timing, and recovery tests still open. It installs from its release package.

Joolo09

No numbered releases Updated 4 stars on GitHub

A permanent MIDI preset for the FM1 with FL Studio and Ableton Live scripts, drawn as an animated night city with six scenes for chords, composing, rhythm, arpeggios, and sync. Its README, in Russian, is on version 0.9.4, and it installs from its own page with a browser emulator.

hericdk

Latest 0.9 Updated 8 stars on GitHub

A space adventure based on SLOOP 2.7.1: one hand flies the ship with two knobs while the other plays the music. Land on planets, mine, fight robots, and warp between stars. It installs from its own browser page, which also runs the firmware in a 3D simulator with sound.

Charles Vestal

Latest 0.10 Updated 12 stars on GitHub

Twelve singers from MonkSynth, a formant vocal synthesiser after the Delay Lama plug-in, each with its own character and a mouth that follows the vowel. It reads velocity and aftertouch from the FM1's own keys, with no hardware changes, so pressing harder moves the vowel or bends the pitch. It installs from its own browser page and can be tried first in a browser emulator.

spike-the-percussionist

Latest 666 Updated 9 stars on GitHub

A Felucca mod in which every randomised sound is answered by one of 30 demons of the Ars Goetia, whose sigil takes over the screen. It installs from its release package.

nzimas

Build 48 Updated 2 stars on GitHub

A firmware for inhospitable soundscapes: three generators drawn at random, three effect slots to wreck them, and a master delay and plate reverb. Its README calls it for ambient hellscapes and barren atmospheres, and it installs from its own browser page.

mhellar

Latest 3.0 Updated 3 stars on GitHub

A robot turntablist with a nu metal band: the speech synthesiser SAM says 27 words onto a virtual record that you scratch with the keys and jog wheel, over drop-tuned guitars, a bass, and a 12-piece kit locked to ten grooves. Its README says it runs on the FM1, and it installs from its own browser page.

zvenson

OberVave's arpeggiator screen, with Arp, Div, Octaves, and Gate knobs

Latest 3.5.2 Updated 65 stars on GitHub

An eight-voice analogue-style polysynth in the spirit of the American poly synths of 1979–84: two oscillators a voice with hard sync and cross-modulation, a 12 or 24 dB filter that morphs from lowpass to highpass, two envelopes, an LFO, an arpeggiator, a two-track step sequencer, 99 programs, and chorus, delay, and plate reverb. It installs from the FM-1 Firmware Hub. Its README warns against 1.1, whose USB-MIDI out is broken and which no installer can replace once it runs; 1.2 fixed it.

orianbsilva

Latest 0.2.0 Updated 0 stars on GitHub

A four-voice synth built on Hortator, after the ObsSynth desktop instruments: two oscillators with standard, supersaw, wavetable, and granular engines, a sub, noise, sync and ring modulation, a multimode filter, two envelopes, two LFOs, and poly, mono, legato, and unison modes. Its README says 0.1.0 was tested on an FM1. It installs from its release package, and plays in a browser first.

charlesvestal

Latest 0.9.2Updated 3 stars on GitHub

An ocarina for the FM1, for games that listen, such as Ocarina of Time on a Switch 2. It installs from the signed release package, and its website has the manual.

pjac1810

Latest 0.1 Updated 0 stars on GitHub

An eight-voice drone synth after the SOMA Laboratory Lyra-8, by SPELLBOX's maker, on foma, with eight panels saved to flash. All its sounds are synthesised. It installs from its own browser page.

mikejohnsonbeats

Latest 1.8.2 Updated 11 stars on GitHub

A synth firmware by Mike Johnson Beats with 16 engines, 28 effects, and four tracks that play at once. It installs from the browser installer on its site, which links a backup of your presets first, and the site carries a manual and a version history. Only the application part of its source is published, under MPL-2.0; its sound engines, effects, and sequencer are proprietary.

MadMooneyham

Latest 1.2 Updated 0 stars on GitHub

A gamelan-inspired instrument by Lunar Eclipse Forge, mostly Balinese and made for meditative atmospheres: you play the core melody on the white keys and the ensemble weaves interlocking parts and gongs around it, in Balinese and Javanese tunings. It runs on Penumbra's platform, installs from its own browser page, and plays in a browser.

rcell233

Release candidate · Latest 0.4.7-rc15 Updated 0 stars on GitHub

A port of OpenIFW’s monophonic synthesiser, with four oscillators, two main filters, two LFOs, and a full effects chain. It installs from its own browser page, which also plays it in a demo, and its notes are in Chinese.

Tom-Rfid

Latest 0.0.3 Updated 1 star on GitHub

Formerly OpenLiveSynth, a live-first instrument: a virtual analogue synth and a drum machine on four tracks with loops of their own, CAPTURE to turn what you just played into the loop, scenes with a knob that morphs between them, hold-to-play effects, and a Creative Engine that mutates, fills, or simplifies loops. Its numbering started again at 0.0.1 in a new repository on 19 Nov. It installs from its own browser page or its release package, and plays in an emulator.

AudrenThibault

Latest 0.4.1 Updated 1 star on GitHub

An LSDJ-style tracker on an OPL3-style FM engine, with 18 voices, effects inspired by circuit bending, a drum machine and a looper. It opens and exports AdLib Tracker II songs, and also runs on a Mac as a VST3 plugin. It installs from its own browser page.

LXXero

Latest 0.4.2 Updated 1 star on GitHub

The FM1 as an AdLib: an OPL2 emulation that plays SoundFX Macs Opera songs, the DOS soundtracks of LINEL’s games and Stone Age, and since 0.4 a tracker that edits and saves them as .CMF files. Its README says earlier versions ran on a real FM1. It installs from its release package.

putchdev

Latest 2.0.1 Updated 1 star on GitHub

The Mega Drive's sound chips as a synth: recreations of the YM2612 and the SN76489, with a library of 128 FM patches. Its web app fills the library from .opm files or a game's VGM music, edits the patches, and streams the original songs to the FM1. It installs from its release package.

thomasgregorymarsden-code

OPX

Latest 0.2.0 Updated 2 stars on GitHub

Felucca 1.5.1 with one more engine, an altered-FM engine after the Korg opsix: six operators routed by an algorithm, EGs, LFOs, a filter, and effects. Everything Felucca does stays. A project with an OPX track opens only on OPX. It has a browser simulator and an editor with an OPX tab, and installs from its own page, which can return the FM1 to M-VAVE’s V15.

thomasgregorymarsden-code

Latest 0.2.0 Updated 2 stars on GitHub

The OPX firmware with the OPX engine alone: one part, with the memory of all four parts, so every opsix effect type fits and the short delay reaches 300 ms. Other tracks of a project stay in it but are silent. It has its own browser simulator and editor, and installs from its own page.

w0ts

Latest 0.3Updated 38 stars on GitHub

A modular firmware built on SLOOP, Felucca, Melodee, X0X, and other FM1 projects: you choose its engines, drum kits, effects, and features in a browser builder with a live flash and RAM budget, try the build in a simulator, and install it from the same site. Its releases come in ready-made flavours; 0.3 adds Ableton Link and SD card support, and its new memory layout erases projects saved in flash, so back them up in the web editor first. Its README calls it early access and says it runs on real FM1s while most features are tested in the emulator and on a computer.

dspaudio

ORBIT's event tape: two reels above four tracks of notes, playing its demo

Latest 1.0.1B Updated 42 stars on GitHub

A groovebox built on SLOOP with screens inspired by the OP-1: synth, drum, mixer, and an event tape for copying and moving what the four tracks play, with engines of its own beside SLOOP's and a six-operator FM. Its releases carry only the firmware file, installed from a terminal with a script from its source rather than a browser page, and it plays in a browser first.

drophlex

Beta · Latest 2.0.12 Updated 1 star on GitHub

A generative instrument whose three FM voices play interlocking rhythms while the screen draws their orbits, in four scenes with density, phase, and FM ratio on the knobs, and the same notes and voices as its browser and plug-in versions. Its FM1 firmware is a beta, installed from its own browser page.

orgelbobo

Latest 1.1 Updated 0 stars on GitHub

An organ built on Dinghy: three manuals with 84 free-running tone generators and no voice stealing, eight models from tonewheel and combo organs to pipe organs and free reeds, drawbars, percussion, rotary, drive, delay, and reverb, 16 performance setups, three MIDI zones, and control of Yamaha’s SEQTRAK. It installs from its own browser page, which also plays it in a browser, and has a build for the SMK-37 Elite.

hacha

Latest 1.1 Updated 0 stars on GitHub

A generative ambient firmware: FM voices through a tape echo and a plate play by themselves in seven imaginary worlds, while a key offers something to a hidden state and the knobs change the weather. It installs from its own browser page or its release package, and plays in a browser emulator.

MattKuebrich

Latest 1.0.3 Updated 12 stars on GitHub

A modular synth of over 80 modules, among them synth engines, filters, drums, a sampler and granular player, sequencers, and effects, patched and played on the FM1 itself. It installs from its own browser page, whose emulator runs the same firmware with a visual patch bay and can control an FM1 over USB, changes syncing both ways.

MadMooneyham

Latest 1.9 Updated 1 star on GitHub

A space-drone instrument by Lunar Eclipse Forge: five slowly beating voices swell in when it starts, with a soft voice in a long shimmer reverb, a slow swell, a looper that follows the scene's key, and a MORPH control that moves between scenes. Version 1.5 adds a journey that travels by itself, a voice that sings, and loops built from several sounds. It aims for the cinematic drone of the ELTA Solar 42, and installs from its release package.

deamonSLINKY

Latest 0.17.0 Updated 16 stars on GitHub

A live-performance firmware of ten genres of self-playing music that you steer in real time, with an auto-DJ, a drum sequencer, an acid line that answers itself, and a six-operator FM engine that plays 22 DX7-style voices and up to 16 of your own, loaded from a .syx file. It installs from its own browser page, which checks the package against the unit, and plays in a browser first.

dagnazty

Latest 1.9Updated 0 stars on GitHub

A six-track groovebox on SLOOP, with three synth tracks and three drum tracks whose kits come from a USB stick. Its release carries a firmware package, installed from a computer over USB, and a web installer. Its README calls it a personal fork tested on one FM1, and says it keeps your projects, presets, samples and settings and can go back to SLOOP or the official firmware.

acidsound

No numbered releases Updated 4 stars on GitHub

Firmware that runs PICO-8 carts (through the femto8 engine) on the FM1 and the SMK-37 Pro, with the controls mapped to the game pad. It installs from the picovave-fm1.fwsc package in its release, and carts are uploaded over SysEx. Its README is mostly about the SMK-37 Pro and does not state whether it has been tried on an FM1.

The Shrimp Blimp

Beta · Latest 0.5.0-beta.1 Updated 10 stars on GitHub

A performance sampler built on Felucca: two long-song slots with up to 32 playable chops each, and a separate drum kit, sharing 500 KiB of sample storage. It samples digital USB audio straight onto the selected song or drum pad, by threshold or timed capture, and lets you audition and trim a take before keeping it. A browser editor sets each chop's playback points, reverse, cents, gain, and crossfade, and keeps reusable chop collections. A variable-length sequencer has step-grid and piano-roll views, with patterns and an arrangement. It installs from its own browser page, which covers coming from other custom firmware, and its emulator lets you try it first, record WAV or MP3, and send sample banks and sessions to the FM1. This is the final beta: back up a complete session before updating, since v0.3.1 cannot open v0.4 or v0.5 projects.

PINGAUDIO

Latest 1.0.1 Updated 1 star on GitHub

A four-track rhythm synthesis groovebox: 49 synthesised drum models and 20 synths, a sampler and granular engine, 23 effects, parameter locks, a line generator, and an autopilot that keeps varying a pattern. It installs from its own browser page, which also plays it, and comes as a VST3 plug-in too.

stefanolofsson

Latest 0.1Updated 2 stars on GitHub

A voice synthesiser built on the Pink Trombone vocal tract model, as fm1-dock with the trombone as its only synth, so USB, the installers and the rescue keep working. It installs from the pinktrombone-0.1.fwsc package in its release.

piotrwozniak

Latest 1.2.5 Updated 1 star on GitHub

An alternative OS built on SLOOP and Felucca. Since 1.2.0 tracks 1 to 6 are synth parts sharing eight voices and tracks 7 and 8 are two independent 16-lane drum parts, with eight named song slots, kick ducking chosen part by part, a live granular insert, and MIDI thru on each track. Its release notes say full testing of 1.2.0 on a physical FM1 is still pending. It installs from its own browser page, with a browser editor.

juan-ms2lab

Latest 0.1 Updated 1 star on GitHub

A performance firmware built on Optimist: two synth layers on one keyboard, layered, split, blended, or alone, with drums on a simple step sequencer, send effects, Bluetooth MIDI keyboards, and one screen whose four knobs edit every parameter, from five engines, 32 drum kits, and 135 presets. Its README says it has been played on one FM1. It installs from the .fwsc package on its release page with Optimist's tools or web installer.

dustekin

Latest 0.15 Updated 1 star on GitHub

A John Carpenter-inspired soundtrack sketch: the keyboard plays Juno, piano, Pro-1, guitar, bass, CS-50 and CS-80-style sounds, chords, and Linn LM-1 drum samples, with an arpeggiator, a phrase recorder, and a five-track visual sequencer that saves up to 16 songs. Its maker calls it a prototype and says it has been played on an FM1. It installs from the .fwsc package on its release page, following the Firmware Hub's install steps with a bootloader.

elpabl0

Experimental · Latest 0.4 Updated 0 stars on GitHub

Writes music with you: pick a place on a map of genre towns and it writes a four-piece sketch of drums, bass, keys, and lead, then re-roll any member, change the key, let the band jam, play punch-in effects, edit any part step by step, and keep four save slots. Its README says 0.2 ran on an FM1, and what 0.3 and 0.4 add has been tested only on a computer. It installs from an installer page in its release.

Charles Vestal

Latest 0.6.4 Updated 29 stars on GitHub

A pocket arranger in the spirit of the Yamaha QY70: a style plays a band of eight instruments and the chords you play steer it, with songs made of sections, two melodies, and General MIDI sounds from Sonivox EAS, so MIDI in plays it as a sound module too. If you own a QY70, it can build that machine’s 128 preset styles from your own ROM; nothing of Yamaha’s comes with it. Built on Felucca’s platform layer, it installs, teaches, and plays in a browser from its own page.

superxor

Latest 0.1.2 Updated 0 stars on GitHub

A generative garden pond derived from AMB-1: switched on, it is already playing breathing voices, drops on loops of unequal length, a gliding bass, and quiet drips through a tape echo and a plate, and you tend it through rain and thunder, across nine pieces. It installs from its release package.

NicholasPratt

Latest 1.7 Updated 0 stars on GitHub

A four-voice wavetable FM synthesizer built on Dinghy and Felucca: two oscillators a voice, each a chain of three wavetable operators that modulate by FM, ring, or mix, with a resonant filter, an LFO, a looping modulation envelope, chorus, delay, plate reverb, and eight patch slots. It installs from its own browser page, which since 0.8 also has an editor that plays Prysm in the page and stays in step with a connected FM1. Version 0.9 added a polyphonic sequencer that records live, and 1.0 VCA OPEN, which holds the amp open for a drone.

hitosu

Latest 0.27 Updated 12 stars on GitHub

Pocket Tracker / Fusion Machine, a ProTracker-style tracker whose tracks play synth engines and samples side by side. It installs from the install page in its release, with a demo disk, and has a browser emulator, manual and editor. The README says the firmware runs on the FM1 and is still being made lighter.

646timur-cell

Latest 1.5.1 Updated 3 stars on GitHub

A hard fork of Felucca: a minimal groovebox with an Elektron-style sequencer and several sound engines. Its release carries the package, an installer page, and an editor, and records a hardware-tested baseline. Its notes report USB audio crackling on the regular firmware, which is under investigation, and advise backing up your banks first.

Quixotic7

A grid of PurpleMonkey's pixel-art screens, each with an animal character

Beta · Latest 0.12 Updated 9 stars on GitHub

A first instrument for a small child, by ChoralRoot's author: press any key and something nice happens. Every key is a note on a five-note scale or a drum, over a backing beat, with four animal friends on the screen and no menus. It installs from its own browser page and plays in a browser first.

matttallison

Latest 1.8Updated 0 stars on GitHub

A four-section performance synthesiser after the ARP Quadra: a bass, a string ensemble, a polyphonic synth and a two-voice lead play at once across a split keyboard, through a 14-stage phase shifter, reverb and delay. It has one-finger chords with a bass root, and a sequencer over the keys you hold that syncs to MIDI clock. It installs from its release package.

Guillel51

Latest 1.5.29 Updated 3 stars on GitHub

A synth firmware with a wavetable sound, a spectrogram filter, a four-track tape deck, and a song generator with 49 genres, made as a companion to the GammaWave VST. It installs from its own browser page and has a web studio and a browser emulator. Its numbering started again at 1.0 on 16 Nov, after 4.1.0.

MammothCheese

Latest 2.4 Updated 1 star on GitHub

A four-track groovebox that plays like a four-piece band, lead, pads, bass, and drums. Since 2.0 it has 72 sounds and 23 drum kits, 30 effect pedals with four slots an instrument, a step recorder, beat repeat, a key lock, and a song sequencer in which each instrument follows its own arrangement. It installs from the .fwsc package on its release page and plays in fm1-emu in a browser.

F0nski

Latest 0.9 Updated 0 stars on GitHub

A four-track groovebox on fm1-base, with Plaits' 24 models, a 16-pad kit, a step sequencer with parameter locks and trig conditions, eight generative sources such as Game of Life, chord progressions, and Tonnetz walks, punch-in effects, and an animated scene on every page. It installs from its own browser page, which also plays it in an emulator, and has a manual.

nzimas

No numbered releases Updated 2 stars on GitHub

Firmware after SOMA Laboratory’s Pulsar-23, for experimental IDM, with an audio engine written from scratch: six tracks, 16 engine profiles, 147 sound families, macros, a phrase generator with polymeters, and a performance mode. It installs from its own browser page, which its README says to open in desktop Chrome, Edge, or Opera, and the site carries a manual.

tulpasoftworks

Latest 0.3 Updated 0 stars on GitHub

A drone instrument of thirteen sine voices that flow towards the note you play, an angel cluster above the root and a demon cluster below it, with a Heaven / Hell knob. It also runs on a Mac as an Audio Unit instrument, and its FM1 firmware is in its release package.

zeptosecond-dsp

Latest 1.1.1 Updated 1 star on GitHub

A self-playing additive instrument for generative, evolving soundscapes by Arcturus S6’s maker, in which cellular automata decide which harmonics sound. Built on Dinghy; its README says it was tested on one FM1 and calls it experimental. It installs from its release package.

joshbartlettband-web

Rainbow mode's unicorn, one of its 40 friends, under a rainbow with its name below

No numbered releases Updated 24 stars on GitHub

A music toy for small children, built on Felucca: every key shows its note in its own colour, and 40 friends, from ducks to a unicorn, each bring a picture, a sound, and a beat, with sound tricks on the top buttons and a volume limit for small ears. Holding HOME and SAVE opens the full Felucca synth. It installs from its own browser page, which can put M-VAVE's V15 back, and plays in a browser first.

chasedeanda

Latest 0.1.8 Updated 2 stars on GitHub

Generates a band in one press: chords, bass, drums, and melody in a chosen style stay in sync and play off each other, and in GLO Live the keys solo parts, cue fills and drops, and play effects. It installs from its own browser page or its release package, and plays in a browser.

adamcharleswilsonmusic-code

Latest 745 Updated 1 star on GitHub

A side-scrolling action game: defend the dam, ride through robot city, fly to the data center, and defeat Mother. It comes as a firmware package with a quick-start guide, installed with the tools in its source archive.

karlalex732-dotcom

Pre-release · Latest 0.5.2-beta Updated 1 star on GitHub

Six tracks, five instruments and drums, with 256 built-in sounds, two trap kits, 64 steps a track, and a song mode. Its release carries a firmware package and a Windows installer, and its README says booting and running it on an FM1 still need checking.

DJ Redacted

Experimental · Latest 0.2.1 Updated Not on GitHub

An experimental four-track lo-fi groovebox built on Felucca: ALGORITHM picks the track, and four knobs set its fracture, static, chance, and mutate. It installs from its own browser page, which offers 0.1 as a known-working rollback because hardware testing of 0.2 is still pending.

Quixotic7

Latest 0.4.0Updated 52 stars on GitHub

A firmware that does almost nothing by itself: it sends every key, button, encoder and the MASTER pot to a computer and shows what the computer sends back on its LEDs and screen, so a firmware built for an emulator runs on the computer with the FM1 as its panel. It installs from its own browser page, and its release has packages with and without Bluetooth MIDI.

gggguto

Latest 1.0.0 Updated 4 stars on GitHub

An experimental soundscape instrument with two machines: Bioma, a synthesised ecosystem of birds, insects and water, and Atolls, two sample loops you steer with windows, fragments and landing points. A browser editor writes samples to its four device slots. Built on Felucca and SLOOP. It installs from its own browser page, which checks the package’s identity and hash.

DanimanX

Latest 2.0.0 Updated 1 star on GitHub

An acid, techno and big-beat groovebox forked from Felucca, with a drum machine modelled on the TR-909, a mono synth modelled on the SH-101, two TB-303-style basslines with an algorithmic generator, and a sliced breakbeat player that takes your own loops. It installs from its own browser page, which can also put M-VAVE’s firmware back, and has a manual.

JazzyRhythmer

Beta · Latest 0.1.1-beta3Updated 15 stars on GitHub

A six-track groovebox based on JIANT, with nine synth models, 303-style acid and sequenced breakbeats. It installs from its browser installer or its release package, and has a browser emulator and editor. Its README says the owner has confirmed listening on a device, warns that its package restores its factory loops, and says to back up first.

hamperj

Latest 1.4.2 Updated 2 stars on GitHub

Generative drums and bass with PERF-1's drum and bass voices and FMini-1's ladder filter: pick one of 19 styles and it draws patterns from that genre's feel, which keep changing as you play, over a bass line in your key, with breaks, builds, and fills on a button, a DJ filter, MIDI clock, and USB audio stems. It installs from its release package, or as an fm1-dock module, and plays in fm1-emu in a browser.

tskorbenko

Latest 0.3.0 Updated 1 star on GitHub

A generative reggae and dub band: six players (drums and percussion, bass, skank, organ, horns and lead, and piano) across 11 styles from ska to dub techno, with an Evolve control and transitions that do not stop the music. Its README, in Ukrainian, says it is built on M-VAVE’s FM1 Open SDK. It has no release; its .fwsc package is in the repository.

charlesvestal

Latest 0.6.1 Updated 9 stars on GitHub

Runs instruments written in Lua over sounds written in Faust or C, copied to the FM1 as a USB drive with nothing to reflash, after monome's norns. Its site plays it in a browser, installs it, and has a manual, and its emulator has a panel for writing your own.

devrvega

Latest 0.1.1 Updated 0 stars on GitHub

A sixteen-part sound module, as the rack modules of the nineties were: a part for each MIDI channel, each playing a preset of sounds you choose, with a filter, envelopes, reverb, and chorus. It plays .sf2 files. It installs from its own browser page and can be tried in a browser first.

RudimentSeq

Latest 0.1.3 Updated 0 stars on GitHub

A Felucca fork in which any track can play one of 174 drum rudiments in place of its step pattern, each hand on a note of its own with the sticking's accents, ghost notes, and grace notes, across up to four rudiment lanes. It installs from its own browser page.

miguelhd

Latest 0.7.2 Updated 0 stars on GitHub

A drone synthesiser of four Schmitt-trigger oscillators, made as a raw stereo source for guitar pedals and modular systems, with three pressure keyboards and an oscilloscope always on the screen. It installs from its release package.

SikkenWorks

Latest 2.0.14Updated 2 stars on GitHub

A monophonic bass synth built on Cycle Exchange Synthesis, with a selectable band-limited saw oscillator, two sub-oscillators, modulation, sound shaping, effects, and a sequencer and arpeggiator. Its README says some of its fixes still need confirming on a real FM1. It installs from its release package.

AndrewGG88

Latest 2.0.1 Updated 17 stars on GitHub

An eight-voice virtual analogue synth after the Roland SH-101 and S-1, with an arpeggiator and a step sequencer. It installs from its release package.

keremimo

Experimental · Latest 1.0.5Updated 22 stars on GitHub

A synthesiser fork of Melodee, by its author, with Bluetooth MIDI and 24-bit audio. Its 1.0 has six engines, among them a PPG Wave and a three-oscillator HYDRA, two parts, factory libraries, and a web editor, and the project also builds for the SMK-37. Its README called 0.1 experimental, with checks of the exact release package still pending. It installs from its own browser page.

tomorrowsman

Latest 1.0.0 Updated 0 stars on GitHub

A slow ambient piece that plays itself and changes over hours, a fork of Charles Vestal's AMB-1: a pad, bells, a gliding bass, and a low ground that come and go like weather, through a tape echo and a plate, with Mood, Density, Drift, and Space on the knobs. It installs from its release package.

delirioux

Latest 1.0.6 Updated 0 stars on GitHub

Live club mixing: four layers, lead, chord, bass, and drums, play by themselves in twenty club styles while you drop in new lines, break it down, and blend into the next style. All its sounds are synthesised. It installs from its own browser page and plays in a browser first.

OCKM-STUDIO

Beta · Latest 0.1.3 Updated 6 stars on GitHub

An evolving Satie soundtrack: Gymnopédies 1–3, Gnossiennes 1–3 and Ogives 1–4 in five moods, with lead, bass, an optional inner voice, drums and atmosphere that follow the scores and evolve while you work. Four Home knobs set Tempo, Energy, Evolve and Mix, and GLO opens a built-in guide. They are simplified electronic arrangements, not piano performances. Its notes record installs from V15 and back passing on an FM1, and say recovery from an interrupted update is not yet tested.

jrdntnnr

Pre-release · Latest 2.1-preview Updated 1 star on GitHub

A dungeon-synth firmware turned toward the desert, built on GHOULBOX (a Felucca fork) with maqam tuning, Arabic rhythms, oud and ney recordings and stone-room reverbs. It installs from its own browser page. The README calls the current build a development preview that has been tested on a host and emulator, with validation on a physical FM1 still pending.

joakimeriksson

Latest 0.3.2Updated 2 stars on GitHub

The Elka Synthex of 1981, by fm1-emu's maker, ported from synthex-web and checked sample by sample against it: its 80 factory sounds, two layers of eight voices, chorus, and an algorithmic reverb. Its release notes say the code was installed and played on a real FM1; the delay and saving edited sounds are still to come. It installs from its release package with the FM-1 Firmware Hub, and plays in fm1-emu.

deabrewcontato-code

Latest 0.2.0 Updated 0 stars on GitHub

A synth inspired by São Paulo, with three wavetable, analog, FM, or noise oscillators, a ladder filter, a modulation matrix, and a 303-style sequencer. The same engine runs in a browser and as a plugin; the FM1 version is built on SLOOP and installs from its own page. Its notes are in Portuguese.

devrvega

Latest 0.1.0 Updated 1 star on GitHub

Turns the FM-1 into four MIDI sequencers (melody, chords, eight-track drums and two generative modes) for controlling other instruments; the FM-1 makes no sound of its own. The README calls it young (0.x) and reports timing measured on an FM-1. It installs from its own browser page in Chrome or Edge, and also from its release package, with a browser emulator to try first.

schwartzworld

Beta · Latest 3.0 Updated 2 stars on GitHub

A live groovebox firmware based on Felucca, with six synth tracks and a drum machine, a song mode, USB audio, MIDI clock and a full backup. It installs from its own browser page, which also has an editor and a way back to the official firmware. Its README calls it a beta and says to install at your own risk. Its one GitHub release, 1.0.0, packages it for the Firmware Hub, while its README names the version 3.0.

zvenson

Latest 3.5 Updated 8 stars on GitHub

A seventies string machine built from OberVave: six fixed registers from contrabass to horn, three bucket-brigade lines for the ensemble, a phaser, delay, and plate reverb, 16 voices, an arpeggiator, and a two-track sequencer. Its README says it has been tested on an FM1. It installs from the FM-1 Firmware Hub or its release package.

Steve Duda (Xfer Records)

SHRUB's oscillator screen, with a wavetable drawn in 3D above its four knobs

Free · Beta · Latest 1.15 Updated Not on GitHub

A wavetable synth from the maker of Serum, with Serum's wavetables, filters, and envelopes, LFOs, a 16-slot modulation matrix, a seven-effect rack, an arpeggiator, an eight-lane motion sequencer, and 100 factory presets. It installs from its own browser page, and its browser editor edits the FM1 over USB or plays SHRUB without one.

putchdev

Latest 1.0.1 Updated 0 stars on GitHub

Two Commodore 64 SID chips as a six-voice synth, from a port of reSID, with the 6581 or the 8580 and a library of 128 patches. Its web app edits them, takes the instruments and drums out of a .sid tune, and plays the tune on the FM1 over MIDI. It installs from its release package.

thomasj

Latest 1.5.1 Updated 3 stars on GitHub

A C64 music deck that plays High Voltage SID Collection tunes on an emulated C64, with every voice open to remixing from the panel or a MIDI keyboard. It sounds through the FM1's audio jack, over USB audio with each voice on its own channel, or on real SID hardware over ASID. It installs from its own browser page and plays in a browser emulator.

dsablic

Latest 2.0.0 Updated 10 stars on GitHub

A C64 SID tracker-synth: two SIDs, a drum kit made on the chip's own voices and four sampled digi drums, steps given a chance to play, songs written on the FM1's keys that open in GoatTracker 2, and MIDI clock and SysEx. Its 0.2.0 test build ran on one FM1 before 0.3.0. It installs from its release package and plays in a browser first.

delirioux

Latest 1.0.4Updated 1 star on GitHub

Generative 90s eurodance: press PLAY and it writes a song in one of ten styles, with offbeat basses, piano and supersaw stabs, a hook, a choir, and a key change for the last chorus, steered with four knobs. It is built on Daurade, Tuna and Felucca. It installs from its own browser page and can be tried in a browser first. It runs on the FM-1, with no warranty.

lelacnoir-lab

Latest 2.2.0 Updated 5 stars on GitHub

An eight-track groovebox derived from Skiff and Felucca, with its notes in French: 448 presets, a sequencer, a song mode, scenes and a PERFORM mode, a live mixer, and a USB editor. Its README says the firmware was validated on a physical FM1. It installs from its own browser page, which also plays it, and its release carries the package.

isod89

Experimental · Latest 0.10Updated 7 stars on GitHub

A rave that writes itself, a firmware made from Clipper and SLOOP. Its README calls 0.10 experimental: it passes its tests on a computer and is being tested on the FM1. It installs from its browser installer, with SIREN STUDIO beside it, and can go back to V16 or V15.

illuminus5

Skiff's tracker and mixer screens

Latest 2.7 Updated 198 stars on GitHub

A six-track groovebox built on Felucca, whose engines, sounds, and file formats it keeps: fourteen synth and drum engines, a 64-step sequencer with chords, ratchets, trig conditions, and parameter locks, patterns and songs, a performance layer, and screens that draw what each knob does. It installs from its own browser page, which can also return the FM1 to M-VAVE’s V15, and it has a browser editor. Version 2.0 adds a new sequencer and songs that chain, 2.0.1 also has builds for the SMK-37 Pro keyboard, and 2.6 shows the FM1’s screen, large, in the editor’s Screen tab.

LIkst4

Latest 1.2 Updated 6 stars on GitHub

Skiff's groovebox with more engines: wavetable, additive, a Moog-style oscillator, and a Plaits port, with analogue-modelled filters, Devilfish-style controls, a step arpeggiator, eight tracks of USB audio for a DAW, and screen mirroring. It installs from its release package.

isod89

SLOOP's tracks screen, with its four tracks playing

Beta · Latest 2.8.5 Updated 847 stars on GitHub

A groovebox firmware built on Felucca, with projects, patterns, and songs, twelve engines, among them a six-operator FM that imports DX7 voices and physical models of strings and bells, and its own web editor for presets and a sound library. It installs from its own browser page and leaves through M-VAVE's M-UPGRADE, as Felucca does.

shaw-core

Test build · Latest ALG05 Updated 5 stars on GitHub

An experimental fork of SLOOP 2.2 that adds engines of its own: a six-operator DX7 that imports DX7 voices, virtual analogue, additive, pluck, and Karplus-Strong strings, each editable on the FM1. It installs from its own browser page and has its own web editor for sounds. Its notes are in Chinese.

altessproduction

Latest 1.8 Updated 5 stars on GitHub

SLOOP with a dub wing: a DUB filter module, a dub siren on OCT+, ten riddims to load into the sequencer, a four-band isolator, a tape delay whose TIME knob bends the loop, per-track throws, and a WIRES visualiser. It installs from its own browser page and plays in a browser.

majnikool

Test build · Latest 2.5-b28 Updated 5 stars on GitHub

SLOOP with up to twelve DX7 voice banks, kept and named in its editor, and presets grouped by kind. Its builds are tests, so back up first. It installs from the FM-1 Firmware Hub.

René Bohne

Latest 2.4 Updated 3 stars on GitHub

SLOOP with a four-operator FM engine after Floyd Steinberg's 4-OP idea: an envelope per operator, seven pages, and a live oscilloscope that draws the envelopes as you play. It installs from the FM-1 Firmware Hub.

zvenson

sloopDX's banner: The FM-1, as a DX7, beside its algorithm screen

Beta · Latest 4.0.1 Updated 28 stars on GitHub

SLOOP's live workflow with a DX7 inside: a fork of SLOOP that replaces its engines with one six-operator DX7 engine, ported from Dexed, with every voice parameter editable on the FM1 and room for 256 voices from your own banks. Its drum track plays FM drums you program on the device, and patterns run up to 128 steps. It installs from its own browser page and has its own web editor.

Spampy-Droid

Latest 1.1 Updated 6 stars on GitHub

A custom firmware based on Felucca and Sloop, with a synthwave-inspired interface, sound tools, scenes, drum processing, effects, and games. Its 1.0 release adds Neon arpeggiator modes, a slicer, an extended envelope, and five built-in arcade games. It installs from its release package, and has a video guide.

genkigenki

Latest 1.0 Updated 6 stars on GitHub

A talking synth, written for the SMK-37 and built for the FM1 too: every key speaks the next word at its pitch, chords speak in harmony, and MOPE, a gloomy robot, says what he thinks of what you play. Its README asks for feedback on how it plays on the FM1. It installs from the SMK37 page’s FM-1 tab.

pjac1810

Latest 0.3 Updated 2 stars on GitHub

A talking spelling game after the 1978 Speak & Spell, written independently with its own speech, built on foma. It has SPELL, LETTER, SAY IT, SECRET CODE and MYSTERY WORD games on four levels, a SING mode, a letter synth on the keys, and circuit-bending settings. It installs from its own browser page, which can also restore the original firmware. Its README is in French.

Spiralfractalplugins

Beta · Latest 1.0 Updated 1 star on GitHub

A four-track live groovebox built on Mycelium and SLOOP, with six psytrance, techno, and acid grooves, four 240-bar factory songs, a PSY FX page, and per-track probability. It installs from its own browser page.

MammothCheese

Latest 1.0 Updated 1 star on GitHub

Splits the keyboard in two: the lower keys play one instrument, CHOC, and the upper keys another, BERRY, each with its own sound, octave, volume, and playing mode, with a drum machine and a pad sequencer beside them. It installs from its release package with M-Flasher.

hed0rah

Latest 1.1.0 Updated 0 stars on GitHub

A fork of Felucca with a shell of its own, built around pairs: a SOUND that makes the tone (FM6, LIZARD, SHOCK, DRUMS, MOUTH, ANALOG, PHASE, or PHYS) and a NOTE engine that chooses the notes (KEYS, CHORD, RUDIMENT, LINES, ALIVE, and more). Hold HOME and the octave becomes a wheel for picking the pair. It installs from its release package.

jonludwig1234

Latest 1.0.0 Updated 1 star on GitHub

A firmware built on M-VAVE’s FM1 Open V14 that adds four engines, a virtual analogue polysynth, a TR-909, a C64 SID, and a granular one, with a 128-step sequencer with Euclidean and 303 acid generators, an eight-scene clip launcher, grit and punch effects, a sample slicer, MIDI CC learn, and four demo songs. It installs from its release package with M-VAVE’s FM-1 Workbench.

EberonLtd

Latest 1.1 Updated 3 stars on GitHub

A synthesiser grown out of Clipper, SLOOP, and Felucca, for the FM1 and the SMK-37 Pro, with 26 engines, four of them new, and 819 factory sounds. Its README says it is built on Clipper 1.3, which runs on the FM1, and passes its test suite on a computer, and that its SMK-37 build has been played on an SMK-37 Pro. It installs from its own browser page, with a web editor.

MichaelAPerry

Pre-release · Latest 0.2 beta Updated 0 stars on GitHub

A Mario Paint-style music composer: stamp characters on a staff to write songs with 31 Mario Paint sounds, eight layers, flats and triplets, swing, and bar editing. It has per-sound MIDI out, clock sync, eight song slots with autosave, and a Twinkle Twinkle demo song, and installs from its own page. The sounds and sprites come from Super Mario Paint, a separate asset pack with its own notice.

OllieNicklinUK

No numbered releases Updated 3 stars on GitHub

Four synth machines on Felucca, one per track with eight voices shared: OB-Z, a brassy poly; WAVE, from Void Wave; NANO, a 303 and a polysynth; and JUNO, with a Juno-60-style chorus. It has no drums, as a synth expansion played over MIDI, and installs from its own page.

fenderberg

SY1

Latest 1.0.0 Updated 19 stars on GitHub

A polysynth by NCC’s maker that plays Synth1 patches (.sy1), with Synth1’s 99 parameters under its own numbers: two oscillators and a sub, FM, ring and sync, filters, three envelopes, two LFOs, an arpeggiator, unison, and effects, with 256 community presets built in and a bitimbral mode on the FM1’s second core. Its README says it installs and runs on one FM1. It installs from its own browser page, plays in a browser first, and has a patch manager.

michaeljsmalley

Beta · Latest 0.3 Updated 4 stars on GitHub

An audio-visual instrument with 30 audio-reactive visualisers on the FM1's screen and over USB as a webcam. Its release notes say 0.2 has been tested on one FM1, with macOS only. It installs from its own browser page, and a browser version plays it first.

KingXeryus

Latest 4.1.4 Updated 0 stars on GitHub

A Melodee-based groovebox for oriental live music, with a song arranger of up to 16 sections and engines such as DX7, Juno, and acid beside Melodee's own. It installs from its own browser page and has a web editor and an illustrated guide.

oikoaudio

Latest 0.15.0Updated 2 stars on GitHub

A digital drum synth with seven voices and a step sequencer, using the LXR-02 firmware's sound engine, in two forms: firmware for the FM1 and CLAP, VST3 and Audio Unit plugins for a DAW. It is licensed GPL-3.0, installs from its own browser page, and can be tried in a browser first.

marksweiss

Latest 1.0.1 Updated 7 stars on GitHub

A twelve-voice wavetable synthesiser built on Dinghy, with two oscillators per voice, a resonant filter, two envelopes, an LFO, a four-slot effects chain, an arpeggiator, and two step sequencers. A browser tool manages patches and loads your own wavetables, and its README says it was tested on an FM1.

barnierg76

Latest 2.0 Updated 1 star on GitHub

An instrument for long, slowly moving sound, by Golf's maker: four layers each play a built-in or sent recording as loops, grains, a stretched freeze, or ringing strings, mixed by a vector point that Evolve moves by itself, through chorus, delay, and a reverb with shimmer and freeze. It installs from its own browser page.

Rastapopolix

Tessera's logo of nine squares above its name and the line A pocket rabbit hole

Latest 3.7.4 Updated 37 stars on GitHub

A generative firmware for composing through systems, called Melodee (Tess) before 2.0. Each of its four tracks plays its own steps or one of thirteen generators, among them Turing, Euclid, Markov, Atlas, and Chord, or one seeded from a phrase played on the keys. Tracks follow and answer each other in one harmony, 16 mod cords connect anything to anything, and sections and a shape for the whole piece let a project unfold over minutes or hours. It installs from its own browser page, in Chrome or Edge, which can also put M-VAVE’s firmware back.

utopick

Latest 1.0 Updated 3 stars on GitHub

Turns an FM1 into the front panel of FM1.Pocket, a browser emulator of the FM1: its keys, knobs, and buttons play the page, and the page’s screen and lights show on the unit. With no page open it works as a USB MIDI controller. It installs from its release package.

leonardoMirabal

Latest 0.2.9 Updated 1 star on GitHub

A texture synthesiser for the sounds of nature, rain, streams, fire, wind, insects, and birds, computed live with no samples. Four lanes play at once, each a cloud of small events whose number and activity are set from the keys. It installs from its own browser page and plays in a browser.

wave00066

Latest 1.2 Updated 3 stars on GitHub

Lessons, quizzes, and a chord lab for music theory, from scales and modes to chords and keys, in English, Italian, Spanish, and German. It installs from its release package, and its README says it is not yet tested on every unit.

AlexanderSeel

Beta · Latest 0.1.0-beta.18 Updated 4 stars on GitHub

A four-machine acid groovebox: two 303-style mono synths, an 808, and a 909, with patterns, song chaining, and performance effects. Its notes record test passes on an FM1, and it has no licence file. It installs from its release package.

RahelPuest

Latest 0.12 Updated 4 stars on GitHub

A Digitone-style FM groovebox with four-operator FM, virtual analogue, and drum engines, twelve voices, and a 64-step sequencer with parameter locks. Its README says it runs on an FM1, though its 0.12 release notes say it has not yet been tested on a physical one. It installs from its own browser page, with an emulator to try first.

Nuno Zimas

Beta · Build 75 Updated 34 stars on GitHub

Electroacoustic firmware for experimentation, live ambient music, and sound exploration, and not a groovebox. Six layers each take an FM, ANIMA, CALIGULA or RUSSOLO engine and generate their own sounds, with a looper, filter, granulator, bit crusher, and plate reverb on each. It installs from its own browser page.

Quixotic7

Latest 0.1.4 Updated 11 stars on GitHub

A tiny firmware, by ChoralRoot's maker, to stop at between two others: it makes no sound and stores nothing, answers installers as M-VAVE's V15, and carries ChoralRoot's flash safeguards, so an install cut off part way brings the FM1 back in update mode. Its README says 0.1 worked on an FM1, and 0.1.1 fixed two bugs seen on one. It installs from its own browser page or its release package.

sog-maker

Latest 1.1.0.2 Updated 2 stars on GitHub

A trap and phonk groovebox forked from BBL JAM BOX: six tracks with 808s, FM keys, bells, and pads, generators for drums, hats, chords, and bass, a sampler with slices, a piano roll, a performance page with mutes, effect throws, and bar jumps, and tape, VHS, and vinyl colour on the master. It installs from its own browser page, and has a cheat sheet.

apiel

TRIBE's start screen: TRIBE Sound System, 10 tracks, any engine, based on X0X and AMB-1

Beta · Latest 0.3 Updated 14 stars on GitHub

A ten-track groovebox built on X0X in which any engine plays on any track: two kicks, the 909 and 808 voices, a 303, and ACID, LEAD, FM4, and NOISE engines, with sixty-four clips a track since 0.3 and a song mode that plays them in turn, scatter effects on the keys, two master effects every track sends to, and four master knobs you assign. Its page installs it from Chrome or Edge, can put the stock firmware back, and plays it in a browser first.

ignis32

Latest 0.1.1 Updated 6 stars on GitHub

Turns the FM1 into a macro keyboard that VIAL configures, keeping its settings in flash. It stays a USB MIDI device, so the usual firmware installers still reach it. It installs from its release package.

adamcharleswilsonmusic-code

Latest 1.0.1 Updated 6 stars on GitHub

An unofficial parody virtual pet: feed him burgers, praise him, and put him to bed, and when he is happy he plays bongos on the pentatonic keyboard. It is installed with a Python tool from the release's .fwsc package.

delirioux

Latest 1.2 Updated 5 stars on GitHub

Generative music built on Felucca: randomness after Mutable Instruments' Marbles, shaped into melody, bass, accompaniment, and percussion in a chosen composer's manner or one of 86 genres from the 1950s to now. It installs from its own browser page and plays in a browser first.

youlisse

U0U

Pre-release · Latest 0.4Updated 0 stars on GitHub

A drum machine of nine synthesised kits with no samples: the white keys are the steps and the black keys the drums, every effect on the master bus has 16 steps of its own, and patterns chain into a song, with per-step timing, roll, chance, and pitch, two LFOs, Euclidean rhythms, and MIDI clock over USB. Its README says it has been used on one FM1. It installs from its own browser page, which also plays it.

actuallysparky

Beta · Latest 0.2.3 Updated 6 stars on GitHub

Generative ambient and drone, built on Felucca and Jangada: Immaculate Permutation rolls an arrangement in one key, a pad, a sequence, and a chord arpeggio under a voice you play. It installs from its own browser page, which keeps saved projects.

tammygucci

Alpha · Latest 0.9 Updated 1 star on GitHub

A moodbox built on Skiff that writes a song, or helps you write one, then lets you perform it with each key a part of the song, a being summoned to improvise in your chords, and a retro colour engine on the mix. Its README calls 0.9 an alpha that works on its author’s FM1. It installs from its own browser page, with an editor and a browser emulator.

galfaroth

Latest 0.11.0 Updated 4 stars on GitHub

A resampling sound-design instrument: pick a source (FM, analogue, drums, or a resample), play it, modulate it with six LFOs and three envelopes, stack up to eight effects, then resample, and every resample keeps its recipe. Its README says 0.4.0 runs on the FM1. It installs from its own browser page.

fatcatstudios-hub

Latest 2.0.2 Updated 2 stars on GitHub

An ambient worship firmware with 16 scenes, each stacking four pad-like voices in a chosen major key, plus a global effects chain. It installs from the installer page in its release, or from the FM-1 Firmware Hub, and can be tried in a browser. GitHub lists no licence; the README describes its own code as GPL-3.0 with the FM1 SDK linking exception.

zvenson

Latest 0.4 Updated 3 stars on GitHub

Makes the FM1 a controller for the VIBE FM, its web player and its VST, or for anything else that takes MIDI: the keys play, the knobs and buttons send the VIBE’s controls, and the FM1 makes no sound of its own. Built on Dinghy, it installs from the FM-1 Firmware Hub or its release package, which has builds for the SMK-37 too.

ant25fr

Latest 1.1 Updated 0 stars on GitHub

A six-track groovebox for the FM1 and the SMK-37 Pro, based on Skiff and Felucca: synths and drums, a wavetable engine, a clips mode on two pages, and a screen that shows what each control does. It installs from its own browser page, which can also put the official firmware back, and has an editor and a browser emulator.

mongio

Latest 0.6.2Updated 1 star on GitHub

A gravitational-wave synthesiser by Mario Texture, sister of Grana: every note is a black-hole merger, with four events at once, a detector you tune like a radio, and a long reverb with shimmer. It installs through an editor page in its release, which also simulates it, and has a Bluetooth variant. Its interface is in Italian.

pianomansam

Latest 0.9.2 Updated 3 stars on GitHub

A generative lo-fi hip hop groovebox on fm1-base, with a sample bank of piano, guitars, cello, harp, and room kits. It installs from its own browser page, which offers the sample bank after the firmware, and its notes say it runs on FM1s with either flash chip.

MaxMaximoff

Latest 1.1 Updated 0 stars on GitHub

A wavetable synth with three oscillators a voice, two filters, four envelopes, a modulation matrix, effects, and a step arpeggiator that keeps its own pattern in each patch. It installs from its own browser page, whose editor also manages patches and four user wavetables. Its notes say to back up before changing firmware.

ELI7VH

Latest 1.0.5.2-midi23 Updated 9 stars on GitHub

Felucca played from an Arturia MiniLab 3: four track faders, knobs that follow the track, preset and engine browsing, a master DJ filter, momentary effect pads, and the session picked up where you left it. It installs from its own browser page.

NoCompile Lab

Latest 0.9.8 Updated Not on GitHub

An eight-track tracker with patterns of up to 64 steps on the FM1, and synths for six-operator FM with 32 algorithms, detuned analogue-style oscillators with a resonant filter, and chiptune voices. It has 58 synth presets and 27 performance effects, such as repeat, reverse, and dub echo, which can be latched live and recorded into a pattern. Its sampler is not available on the FM1. It installs from its own browser page, and plays in a browser too.

hericdk

Latest 0.9 Updated 12 stars on GitHub

A firmware in the style of Winamp 2, based on SLOOP 2.8.4: sounds become a playlist, four tracks record as loops, effects sit on sliders, and 28 visualisers fill the screen. It installs from its own page, which runs it in a 3D simulator first. Its numbering now follows No Man Sky FM, so 0.9 comes after 0.12.

Charles Vestal

X0X

X0X's home screen, with the 909, 808, two 303s, and breakbeat patterns

Latest 1.2.2 Updated 244 stars on GitHub

A groovebox in the spirit of ReBirth: a 909, an 808, two 303s with an acid line generator, and a breakbeat player, all playing at once, with automation, shared reverb and tape delay sends, and a master compressor. A fork of Felucca, it installs from its own browser page, which can also put M-VAVE's firmware back.

Acultur8

Experimental · Latest 0.1.60-stoppedtrace Updated 1 star on GitHub

A fork of X0X that keeps its 909, 808, two 303s, and breakbeat player and adds song blocks and variations, per-sound filters and limiters, and finer timing divisions. Sequences copy whole or one part at a time, any single drum row or either 303, keeping the destination's accents and swing, and each paste can be undone. Tested on only one FM1 so far.

copych

Experimental · Latest 1.2.1-live12 Updated 0 stars on GitHub

A fork of X0X built for playing live: two 303s and generative 909 and 808 kits on one LIVE screen, with phrases to generate, keep, and develop, a Director that queues the next intro, break, or drop, a mixer with mutes and solo, and momentary effects such as filters, tape stop, and snare rolls. It installs from its own browser page, with a browser emulator to try first. Hardware testing is still pending.

Mr-Roboto

Latest 1.1.0 Updated 4 stars on GitHub

A fork of X0X that adds a remix engine with 256 step-remapping patterns for the 909, 808, and both 303s, a TB-3PO generator with 22 scales and motif-based basslines, Grids pattern generation, and an experimental 303 Morph waveform, with pattern chaining, saved startup patterns, and custom LCD colours. It installs from its own browser page, with a browser emulator to try first.

CaptainChronosis

Experimental · Latest 1.0 Updated 0 stars on GitHub

An experimental FM synthesiser of up to 64 paired oscillator cells, joined in parallel, in series, in branches, and with feedback, with up to eight-note paraphony, sequencing, a multimode filter, a wavefolder, and reverb. It installs from its release package or with a Windows updater, whose install path its README says was exercised on a connected FM1.

KotMorderca

Latest 1.2.1 Updated 5 stars on GitHub

A MOD and XM tracker that plays and edits FastTracker 2 and ProTracker songs on the FM1, with up to 32 channels, and a browser song manager for moving .xm and .mod files. It installs from its release package (xmod.fwsc) with any FM1 installer, and has a browser simulator. The README says it is not tested on V16.

izumoe

No numbered releases Updated 0 stars on GitHub

A fork of Felucca with twelve engines, 96 factory presets and a four-track tracker. It installs from the browser installer on its own website, which also has an editor and an emulator. It has no GitHub releases, and its README does not say whether it has been tried on an FM1.

Mello-D

Pre-release · Latest 0.1.0Updated 7 stars on GitHub

A six-track synth, drum machine and song sequencer built on JIANT FM, with 25 synthesis engines and over 700 sounds, a 64-step sequencer with parameter locks, songs of sections and scenes, one-key chords, and IDEAS, which writes a pattern, sound or effect for the track. It installs from the browser, where an editor and an emulator of the firmware also run. Its README asks for official V15 before installing.

aceyprime

Latest 1.2 Updated 15 stars on GitHub

Ambient firmware that plays itself: a cherry tree dropping petals on a river, koi in a pond, and fireflies over a stream, where every movement on screen is a note. The keys and knobs play along, and it installs from its own web page, which can put M-VAVE's firmware back, with a browser emulator to try first.

sparky480v

Latest 1.0 Updated 0 stars on GitHub

A generative ambient machine built on AMB-1 that plays itself from the moment it is switched on: pads, bells on tape loops of unequal lengths, a bass, soft percussion, and now and then a lead, travelling through eight worlds. 27 effects sit on the keys, which can also strum or play the lead. It installs from its release package and plays in a browser.

zvenson

zp12's home screen, with A1 KICK on its LCD above eight channel faders and pads

Test build · Latest 2.5 Updated 38 stars on GitHub

A 12-bit sampling drum machine in the spirit of the 80s: 32 pads at 26 kHz, pitched with no interpolation, eight filtered channels on the knobs, eleven loops on the black keys, songs, step editing, swing, and sloopDX's effects. A fork of SLOOP on sloopDX's platform, it saves beside sloopDX's banks without touching them, and takes your own samples from a browser editor, or since 2.5 records them on the FM1 over USB. It installs from its own browser page.

Firmwares on their way that cannot be installed on an FM1 yet. Each joins the list above once it can.

  • AEther ↗ twaroshinto

    A spectral synthesiser inspired by Paul's Extreme Sound Stretch, with its notes in Polish. Its README says 0.5 has not been tested on an FM1, and there is no release yet.

  • A22 ↗ abektes

    An FM workstation derived from h1, with ten synth and drum engines, eight effects, and a four-track tape. Its README says nobody has installed it on a unit yet, and its package comes only from a build artefact, with no release.

  • AETHER-FM1 ↗ jeanlucmouton30-jpg

    An ambient firmware built on GR!MM, adding a hybrid drone engine and sequencer transpose. Its 2.0.4 release carries a package whose notes say it is still to be tested on an FM1, and its README is still GR!MM's, pointing to GR!MM's hub, with no installer of its own.

  • AMBII ↗ MilkBoyG

    An ambient firmware built on Melodee, for slow, expressive sound design and performance. Its repository has gone from GitHub, and its maker has no public repositories now, so nothing can be installed.

  • Analog Summer ↗ blueshift96

    A fork of SPAMPY that changed only the start-up logo. Its repository has gone from GitHub, so nothing can be built or installed.

  • ANATOMIX VOXINATOR ↗ profikid

    A vocal synthesiser and vocal anatomy laboratory. Its release carries a firmware package, but its README says the silicon is not yet verified and the FM1's USB port needs a powered hub for the microphone.

  • ARCADE RAT ↗ jonludwig1234

    A synth studio, tracker, and arcade emulator collection, with voices from arcade games' speech chips. Its 1.0.0 release now carries a firmware package, but no licence is stated.

  • ASS-ID ↗ altessproduction

    ATEK303's acid groovebox with a drum track of synthesised TR-808, 909, and 707 voices on the same clock. Its 1.0 release carries a package, but its README, in French, says it still has to be checked on a real FM1.

  • Atmosphere OS ↗ codemtm

    An ambient and dub techno firmware. It is built from source only: the v1.0 release has no installable package, and the status file says it has not yet had a device build or hardware test.

  • BAILE ↗ saulofilho

    A tracker for Brazilian funk by Coqui’s maker, with tamborzão, Volt Mix, and montagem among its styles. Its package is in the repository with installer scripts, but there is no release, and its README says it has not yet been tested on an FM1.

  • Beat It ↗ epidex

    A purple-themed firmware with a full-screen scope, built on SLOOP up to 1.5 and on Melodee 1.6.1 since 2.0. Its 2.0 release has a browser installer, but its notes say it has run only in a simulator, never on an FM1.

  • Betis Mode ↗ cotrino

    A Real Betis-themed firmware built on M-VAVE's FM1 Open SDK, with a browser emulator and a downloadable package. Its README says no FM1 has been flashed with it yet.

  • BGIRL FM-1 ↗ track-forge

    An electro edition of Felucca with a sample-fed vocoder and arpeggiated floorwork. Its README calls it a browser development milestone and says not to install it on hardware.

  • Bliss Box ↗ manzanita-research

    A new-age ambient firmware, built from source with no release or installer. Its README says it is a prototype that has not been on an FM1 yet.

  • Blop ↗ OSR-Experiment

    A chord-grid firmware by Obsimo, with one-finger chords, chord rhythms, a kick with sidechain, glide, and reverb, with its notes in French. Its release holds a firmware package, but its README calls it a prototype that has never been tested on an FM1.

  • BlueHare ↗ tristanosuriani

    A Felucca-based firmware with a tracker interface. It is built from source, with no release, package or installer of its own, and its README is still Felucca's.

  • BREAK//174 ↗ EremanSim

    A jungle instrument: PLAY starts a groove at 166 BPM to cut up with rolls, reverse, and dub throws. Its alpha package is in the repository, but its README, in Russian, says it has not yet been tried on an FM1.

  • Bump It ↗ epidex

    SLOOP 2.8.5 with a purple theme, a frequency-coloured oscilloscope, and screen brightness. Its release has a browser installer, but its README says it has run only in a simulator, never on an FM1.

  • CANON-4 ↗ davidpryan

    One phrase played by four playheads, as a canon, after the Fugue Machine and Make Noise’s René. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • Capy ↗ trapperl

    A first instrument for a child of five to seven, with nine instruments, animals on the keys, a band to lead, and games. Its package is in the repository with a Python installer, but there is no release or installer page.

  • Cat Piano ↗ thefriendlyhedgehog

    A piano of real meows in four banks, with a sequencer and an arpeggiator. Its README says it runs on an FM1, but it is built from source, with no release or installer.

  • Compás Tekno ↗ MarcoCasanova00

    A tekno conversion of Compás with its own sample bank and a browser emulator. Its repository holds a package but no release, and its README warns that the bundled samples' licences may not allow sharing a build.

  • Chrome Boy Studio Portable ↗ ColdChrome

    A playful, experimental pocket groovebox that boots straight into a pattern. Its 0.9 package is in the repository, but there is no release or installer page of its own.

  • COSMOS ↗ gadlele

    A drone synth firmware still at the design stage. Only a COSMOS PROBE test firmware can be installed (a browser page that tests WiFi and memory); the instrument itself has no release.

  • CRATE ↗ zisonzishen

    A slice and performance sampler that takes samples over USB. It is published as source, with no release or installer.

  • DCS-FM1 ↗ designloves2

    Makes the FM1 an auxiliary systems panel for DCS World's F/A-18C. So far its repository holds a specification, in Korean, with no firmware.

  • Deal or No Deal ↗ Kiwi3p

    A parody of the game show. It is built from source as a preview, with no release or installer.

  • drift-fm1 ↗ I-am-MaxPower

    An Omnichord-style drone firmware. It has no release or installer page of its own: its README explains how to build one from a fork.

  • DriftSeq ↗ johnskiller

    A 16-track polymetric sequencer. Its web emulator is live, but there is no firmware build yet.

  • DUBWISE ↗aviron3

    A dub techno fork of Felucca with STAB, a chord engine, a tape echo in place of the delay, and a dub song at power-on. It has no release or installer of its own, and its install section is still Felucca's.

  • Erik37 ↗ genkigenki

    A sampled concert grand written for the SMK-37. Its 1.3 release has an FM1 build, which its README says is untested on a unit.

  • FM-1 Arcade ↗ gaskb

    Eight arcade games on Dinghy, Snake among them, with high scores kept in flash. It is built from source, with no release or installer.

  • fm1-1971 ↗ synthi

    A generative ambient fork of Melodee 1.3.5. It has no release of its own, and its README still points to Melodee’s installer.

  • fm1-8p ↗ericdahl-dev

    An analogue-style polysynth of up to eight voices, built as a module for fm1-dock. So far its README says it plays on a computer, and there is no release.

  • fm1-beets ↗ mattb

    Beets as firmware, with a browser version and a TouchOSC visualiser. It is built from source, with no release or installer.

  • fm1-botanica ↗ larkindom

    A generative garden with DX7 voices, long reverb and a pixel-art screen. Its README says it has been checked only on a computer and in a browser, and there is no release.

  • fm1-ctrl ↗ johnskiller

    A thin firmware, by DriftSeq’s maker, that makes the FM1 a hardware controller for web emulators. It has no release or build to install yet.

  • fm1-divisor ↗ ReplicantTech

    A firmware inspired by the Subharmonicon. Its README says it is at the planning stage, testing its processor budget, with nothing to install yet.

  • fm1-doom ↗ Keitark

    Doom's engine on the FM1, by FM-1 NES's author. Its firmware and the loading of game data are still being written, and no build is offered for installing.

  • FM-1 Felucca-Tutor ↗ wochende

    An interactive tutorial on Felucca that teaches synthesis, sequencing, and song building on the FM1's screen. It is published as source, with no release, installer, or licence.

  • fm1-harmonica ↗ jsopdebeeck

    A ten-hole harmonica on fm1-base, by Del Rio’s maker. It is built from source, with no release or installer.

  • fm1-insert-coin ↗ DarkHelmet67

    1980s arcade games for the FM1, starting with Space Invaders. Its README, in Italian, says the first game is still being written, and builds come only from its CI runs until it is finished.

  • FM1 MDX karaoke player ↗ Keitark

    Plays MDX and PDX songs on a software YM2151 and lets you mute a part and play it on the keys. It has been tested on a computer but not yet installed on an FM1.

  • fm-1-monomachine ↗ sirpearson

    A firmware after Elektron’s Monomachine. Its README, in Italian, calls it experimental and says it has not yet run on real hardware.

  • FM1 Move ↗ Nicodesy06

    An eight-track groovebox built from SLOOP. Its device page can install it, and community testers have run earlier builds on FM1s, but there has been no structured hardware test.

  • FM1-Lab ↗ albinoIguana

    A four-patch FM instrument designer with four performance macros, now playing through Felucca’s FM6 engine. Its site has a web installer for a candidate build, but its README says playing it on an FM1 is still to be checked, and no licence is stated.

  • FM1-Hero ↗ g0rst

    A rhythm game in the style of Guitar Hero played on the four knobs, with its notes in German. Its README has a browser prototype and says the FM1 firmware is still in progress.

  • FM-1 NACHTBAR ↗ FartyPants

    A tenor sax over a night-bar backing that plays itself, by FM-1 Piano’s maker. It has a nightly browser installer and emulator, but no release, and its README calls it an early test build.

  • fm1-modes ↗ NikkiKoole

    Extra modes on M-VAVE’s FM1 Open kit, among them TEKNO, CR-78, a rhythm box, and a bass player. Its README says it has run only in the browser emulator, never on a real FM1.

  • fm1-p6 ↗ Jonbenderr

    A Polysix emulation, published only as a source archive.

  • FM-1 Piano ↗ FartyPants

    A hybrid physically modelled piano squeezed into 500 kB. It has a nightly browser installer and emulator, but no release and no licence file, and its README calls it a work in progress.

  • fm1-polyseq ↗ NOVALENTI

    A polyphonic 16-step sequencer and hardware layer written from scratch in C. It is published as source only.

  • fm1-sampler ↗ ferluht

    An eight-track sampler and audio looper whose sound comes from an Android app, with the FM1 as its keys, knobs, screen, and USB audio output. Its README says it has been tested only on a computer, not on a phone or an FM1.

  • FM-1 Studio Tess ↗ jamesusmusic

    A fork of Melodee (Tess). Its package is kept in the repository with install instructions, but there is no release or installer page, and its README says full hardware testing is still to come.

  • fm1-t1 ↗ tensor-programming

    A firmware with Torso T1 functionality. Its README calls it a work in progress, with no release or installer.

  • FM1 Tape Loop ↗ MikeeTeevee

    A live tape loop instrument. Its README says the engine and screen are tested on a computer, and that the device code has never been compiled or run on an FM1.

  • fm1-wave ↗ johnskiller

    A polyphonic wavetable synth on fm1-base, by DriftSeq’s maker. So far its README is fm1-base’s template, and there is no release.

  • fm1-zed ↗ cmlarsen

    A custom firmware based on Felucca. It has no release of its own yet.

  • FM-23 ↗ MarcoCasanova00

    A mental tekno and tribe groovebox with a web installer and a browser emulator. Its README says it has not yet run on a real FM1, and there is no release.

  • FM2K ↗ jukejutsu

    A song-maker firmware prototype. It runs in a simulator only, with no release or installer, and the README says not to install it on an FM-1 yet.

  • FM80S ↗ y6zkcqnf5r-hue

    A synth-looper: play a loop on the keys, then another instrument over it, or program one step by step. It is being written in a browser first, and its notes are in French.

  • fm-dub ↗ imijes

    A dub-flavoured fork of SLOOP. It has no releases, and its README and package are unchanged SLOOP 2.5, so nothing installable of its own is offered; install SLOOP itself instead.

  • FM-PLAITS ↗netroxic

    A generative Plaits voice built on M-VAVE's FM1 Open V14. It has a web installer page and a browser version, but no release and no licence file, and nothing says it has run on an FM1.

  • FM Stud1o ↗ MPASTEAU

    An eight-track groovebox on Felucca 1.6.1, with a piano roll, a drum grid, a song mode, and a mixer. It is built from source, with no release or installer.

  • FM-Tracker ↗ drok123

    A tracker firmware based on SLOOP. Its README calls it a research and host-side prototype, with no flashable firmware yet.

  • FORM ↗ HanzVolt

    A vocal synthesiser: a six-operator formant-FM engine that sings vowels and consonants with no samples, with a 64-step vowel sequencer. Its README calls 1.3 a test build, not a release, that has not been tested on an FM1.

  • FOUROBOROS ↗ Ignignot

    A firmware built on SLOOP and Felucca. Its repository holds only an installer page for a V1 smoke candidate, whose hardware verification is pending, and nothing that says what it does.

  • Frown of Misery ↗ andiogenes

    Braids, Rings and Clouds from Mutable Instruments as a firmware. Its README calls it early development that runs in an emulator but has not been played on a device, and there is no release.

  • genAMB ↗ Kayman18

    A generative firmware based on AMB-1, with two pad synths, a Rings port, a six-voice FM synth, and sequencers ported from VCV Rack. Its RC package is in the repository, but its README says its timing, CPU load and sound have not been tested on an FM1, and no licence is stated.

  • GhettoMachine ↗ siddholdenried-del

    A four-track groovebox on fm1-base: 909 or 808 drums and three tracks that are each a mono synth, a poly synth, or a sampler, with a 64-step sequencer. It is built from source and installed with fm1-base’s script, with no release or installer page.

  • Glitchbox ↗ erikdevos

    Its README calls it experimental and says it has run only in host tests and the browser emulator, not yet on an FM1.

  • GlitchDrums ↗ distraub

    A drum machine after GlitchDrums. Its README says playback on an FM1 is still over budget and a later build was withdrawn, and its only release is a pre-release with no .fwsc package.

  • GLOAM ↗ davidpryan

    A groovebox for witch house and melodic dubstep, with a choir, wobble, rain, and an arranger that can play a whole track by itself, by RELAY-16’s maker. Its README says 0.1 is untested on hardware, and there is no release.

  • GNOMNOM ↗ WisestWizard

    A rhythm game where a gnome eats mushrooms that play the tune. It is built from source, with no release.

  • Haave ↗ thebrodi

    A simple, dreamy ambient firmware for live meditation, a Felucca fork, formerly called Drift. Its README says it runs on its maker's FM1 and in a browser emulator, but there is no public release to install yet.

  • IVee ↗ awolace

    A generative firmware with shared harmony, evolving patterns, and live keys. So far its repository holds only a README.

  • JUNGLE OS ↗ RahelPuest

    Two firmwares that make a drum and bass live rig, BREAK SURGEON for breaks and drums and ABYSS ENGINE for bass, stabs, and pads, linked over JUNGLE LINK. Both play in a browser, but its README says neither has been installed on an FM1 yet, and there is no release.

  • KEY ASSIST ↗ chathuraed

    Per-track scale lock and one-finger chords on M-VAVE’s FM1 Open. Its README says it has been checked only in a simulator and an emulator, not on an FM1, and there is no release.

  • K-GLITCH ↗ Guizmoh

    A glitch machine and chaos generator built from KAWA, by its maker. Its README says its newest feature has not yet been compiled for the FM1, and there is no release.

  • KIRA-9 ↗ CodingSlapfu

    A singing cyborg vocalist firmware planned to work beside AQUORA. The repository holds a planning handoff, specifications and tests only, with no firmware or installer yet.

  • LEDGER-4 ↗ davidpryan

    A tracker of songs, chains, phrases, and commands, after Little Sound DJ and the M8. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • Lilliput ↗ nzimas

    A no-input mixer: six channels feeding back into themselves and each other, with a drum section for rhythmic noise. It is built and installed from source, with no release, and its README says it has been tested on a computer.

  • Lunar Modulator ↗ ip2k

    Open firmware with engines derived from Mutable Instruments' modules and a Movy-style sequencer. It runs only as a virtual FM1 in a browser, and has never written anything to an FM1.

  • MD-One ↗ d0pe1

    A drone machine built from Mutable Instruments' engines. Its README says it was first flashed to its maker's FM1 on 22 Oct, but there is no release or installer yet.

  • Mini-Grain ↗ eldontyrellcorp

    A granular synth by Mini-Tone’s maker, with two polyphonic granular parts, a drone, and a pad. Its 1.0.0 release carries a package, but its README says it has not yet run on a real FM1.

  • MODFM1 ↗ JoshCowley

    A sound-design rack of Mutable Instruments modules that plays in a browser. Its repository holds two installable packages, but its README says nothing has run on an FM1 yet.

  • Moonglass ↗ killerboof

    A dream pop groovebox forked from SLOOP, with eight engines, 123 sounds, chord pads, and a CRT look. Its README calls 0.3 a beta with no hosted installer yet, and there is no release, so it is built from source.

  • more chords ↗ rosen-wav

    A ChoralRoot remix with engines adapted from Melodee and ORBIT. It has a web installer page and an emulator, but no release and no licence stated.

  • MRC Synth ↗ JulesMarecaille

    Felucca’s engines and sequencer with a look of its own, one autosaved project and 24 saved patterns. It is built from source, with no package, release or installer yet.

  • Mutable Dreams 1.1 Ghoul ↗ alexwlloyd

    An editor and installer site for a Ghoul build of Mutable Dreams 1.1. Its package is in the repository, but the site is not published, it is not verified on an FM1, and no licence is stated.

  • mvave-fm1-mpe ↗ monch1962

    A Felucca fork that plays MPE. It is built from source, with no release or installer of its own.

  • MYCEL-8 ↗ davidpryan

    Eight generative parts, with Euclidean rhythms and Turing Machine pitches. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • My Name is Mod ↗ yentzee

    A generative firmware based on Felucca, with 64 steps and four patterns. So far its repository holds only a licence.

  • NESynth ↗ ChanceTheMaker

    An NES emulator, by GameDude’s maker. Its FM1 build is still on a feature branch, and its releases so far are for the SMK-37.

  • NOICE VOICE ↗ mrjoshida

    A physically modelled vocal synthesiser and speech sequencer. It plays in a browser, but there is no release or installer.

  • NoteSorcery ↗ catacombius

    An eight-track firmware that works with Ableton and an Android app. BOTANICA, a firmware built on it with felt piano and droplet engines, has pre-releases, the latest 0.3, each with a firmware package and a web installer. Its release notes say it has been tested only in a simulator and by CI, not yet on an FM1.

  • NSX39 Pocket Miku ↗ AL-255

    A vocal firmware for the Gakken NSX39 Pocket Miku. Its release is source and a browser generator, which builds the package from your own dump of an NSX39's flash chip, so there is no ready package to install.

  • ODeath WAVE-1 ↗gybe808-dotcom

    A Felucca mod with a wavetable synth of 20 waveforms and nine presets. It has an installer page with its firmware bundled, but no release and no licence file, and nothing says it has run on an FM1.

  • Oktowave ↗ PierreArnaudGUYOT

    Felucca 1.6.1 with a WAVELET engine from the Wavelet Synthesizer, and 108 of its presets. Its repository has gone from GitHub; its maker's Wavelet Synthesizer repositories remain.

  • OndaDream ↗ Teryox77

    A synthesiser with 43 presets and animated creatures on the screen, listed as a card until 14 November. Its repository, release, and web pages are gone, and its maker has no other public repository.

  • Opslix ↗ FroggyDenim

    A firmware after the Korg Opsix. Its repository has no README, release, or installer yet.

  • OrganVave-1 ↗ ruppert

    A Hammond B3 and Leslie emulation. Its README says nothing in it has been tested on a real FM1 yet, and there is no release.

  • P1Onken Type P.fm1 ↗ AkirakoSaintJust

    A two-part, four-operator phase modulation synth, listed as a card until 11 November. Its repository, release and web page are gone, and the author's Type P.alpha README says the device firmware now lives in the umetate repository, which is not public.

  • PALEOTONE ↗ fantasmoslam

    A prehistoric groovebox, formerly called DINOBOX, listed above until 21 November. Its repository, installer page, emulator, and manual are gone.

  • Patricktronics ↗ gaumondp

    A generative layer on Felucca. It has install instructions but no release, and has not been confirmed on an FM1.

  • Pelucco ↗ Gadlele

    A Felucca fork by Golana’s maker. It has no release of its own, and its README is still Felucca’s.

  • Pin Head ↗ TruBitTech

    A pin-matrix firmware after the EMS Synthi AKS. Its repository holds a demo page and the start of its source, with no release or licence.

  • Pocket Poly ↗WisestWizard

    A stereo polysynth with a discovery engine, by DEEP FIELD's maker. Its README says it passes the simulator suite, but there is no release or published site yet.

  • POLY5 ↗ questron5000

    Five synths in one on Dinghy, with notes passed round robin or at random, tape wow and flutter, and 24 patches. Its page plays it in a browser, but installing means building the package from source, and there is no release.

  • REGENT-4 ↗ davidpryan

    Play chords and four parts follow them, after the NDLR. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • REGGAE-OS ↗ KemstheSage

    A reggae synth firmware based on Felucca. Its notes call it an early development build whose hardware is untested.

  • RELAY-16 ↗ davidpryan

    A sequencer-first firmware that makes no sound of its own and plays other instruments over MIDI, for the FM1 and the SMK-37. Its README says 0.6 has not been tried on either, although release packages are published.

  • RetroDash ↗ nasonliu

    A pixel-art rhythm game with two songs rendered from SPC files, built on VaveHero and Dinghy. Its beta release holds a firmware package, but there is no installer page.

  • Rhizome ↗ Dr-John-8bits

    An ambient firmware derived from Monades, with an orbital sequencer, granular synthesis, a hall reverb, and a tape delay. Its README, in French, says it has not yet been compiled or measured on an FM1 and asks you not to install it.

  • RIFT ↗ Vaayaa

    Its README, in Chinese, explains how to build and install it, but there is no release or installer page.

  • RIFT by mykeln ↗ mykeln

    An experimental drone instrument derived from Felucca, with nine modes and stereo feedback. Now at 0.8, its README says it belongs in experimental listings until it has been tested on an FM1, and there is no release or installer yet. It is not Vaayaa's RIFT.

  • Rocket OS ↗ cmlarsen

    A clip-launching performance firmware forked from X0X. It has no build of its own yet.

  • roland ↗ andiogenes

    A drum-only firmware built on Felucca. Its README says it has not been tested on an FM1, and there is no release.

  • SIGNAL GARDEN ↗ hvemnd

    An ear trainer added to Felucca, reached by holding two keys at power-on. Its only release is a development pre-release, and its README's install section is still Felucca's.

  • SLAP-5 ↗ CodingSlapfu

    A five-track groovebox with 25 synth engines and 128 patches, by AQUORA’s maker. Its testing pre-releases carry packages, but its README says to keep them off physical hardware, and its installer stays disabled.

  • SLICE64-FM ↗ jeymadcat-ops

    A four-track tracker with SID, FM, and sampler engines. Its web editor has gone, its maker has no public repositories now, and the firmware was never published.

  • Spooky ↗ hvemnd

    A box of sound toys, among them Fart, Burp, Drum Jam, and the Toilet, with a loop recorder. It has no release yet, and its README says it has not been checked on a real FM1.

  • SPOOL-4 ↗ davidpryan

    Four loops recorded by playing them. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • SQ-80 ↗ leonardolopezchavira

    An Ensoniq SQ-80 written from scratch, playing SQ-80 patches with waves from your own ROM dumps. It has releases and a web installer, but its README’s status says testing on an FM1 has not started.

  • TamaMPE ↗ tamabotmusic

    An MPE synth firmware based on Melodee. It has no release or installer of its own, only an emulator page and the source.

  • TERRACE-8 ↗ davidpryan

    A stage sequencer of pulses, gates, ratchets, and slides, after the Metropolis and the Moog 960. One of six sequencer firmwares on fm1-base by RELAY-16’s maker, which make their own sound and send MIDI. It is built from source, with no release or installer.

  • TripDeck ↗ anonymousacademe

    A psychedelic synth whose every screen is an animated picture. Its README says 0.2 runs on the FM1, but it is built from source, with no release or installer.

  • UNIBOX ↗ chinotto1

    A nine-track groovebox built on FOMAJAM, with an arranger, free recording, and a USB sampler. It is published as source only.

  • UNIVERSYNTH ↗futumixxx

    A Felucca fork that renames the splash screen, re-themes Felucca’s web editor, builds a package in CI, and since 17 Nov adds WAVEX, a wavetable-morph engine of its own. It has no release or installer of its own.

  • URANUS 88 ↗ hagan66

    An eight-voice analogue-style polysynth on fm1-dock, with its notes in Swedish. Its package comes only from its CI runs, with no release yet, and there is no licence file.

  • Vapor Loop ↗ Execode765

    An original instrument firmware being developed in a browser first. Its README says no firmware build or flashing has happened yet.

  • Vector37 ↗ genkigenki

    An orbiting overtone synth written for the SMK-37 keyboard. Its page lists a 0.3.2 build for the FM1, and its README says it has not been tried on one.

  • VEGETAL ↗ capitanplaneta80-create

    Plant-growth systems (phyllotaxis, L-systems, tropisms, roots) as a firmware on Felucca, with its notes in Spanish. It has no release.

  • Velo ↗ charlesvestal

    Velocity and aftertouch from the FM1’s keys, with no hardware changes. Its README says it works but is parked with its calibration unfinished, and it is built from source.

  • VirtuoX ↗ telespial

    Piano learning and DX7-style synthesis. So far it is a browser prototype: its README says no flashable firmware has been released.

  • VoiceTest ↗ Plieuw

    Voice analysis and processing for the FM1, from pitch correction to a vocoder. Its README says the sound processing is tested on a computer, but the firmware integration is not done yet.

  • Vostok ↗ g0rst

    A synth for coldwave, post-punk, and darkwave on the six-operator FM engine, for the FM1 and the SMK-37, with its notes in German. Its page has an emulator, but there is no release or installer yet.

  • Wild ↗ saintpid

    An experimental n001se fork. It is built from source, with no release, package or installer, and the README says it is untested on hardware.

  • WitchBox ↗ davidpryan

    A six-track 2-step and melodic dubstep groovebox on Dinghy. Its README says it builds and renders audio on a computer but has not yet run on an FM1.

  • WT-2 ↗ DedrichVonDorn

    A wavetable synth with 206 parameters, installed through M-VAVE's M-UPGRADE app. Its README says to take the package from the Releases page once it is published, and there is no release yet.

  • Wulzie ↗ woolydawg5

    A bass-heavy groovebox in planning. Its README says there is no firmware to install yet.

  • Zombie FM-1 ↗ Joolo09

    Two firmwares, a groovebox and a sampler, with DAW modes for FL Studio and Ableton Live and a web installer. Its README says flashing a physical FM1 has not been verified.